Thanks Gaz looks really nice.

Very smart/ discreet silver on silver... How does gloss black lettering on silver look and any thoughts please on other bits that would need to be in keeping?

Thanks

Just asking,

How difficult is it to do, obviously i can get the lettering off of Duckey Dan but is it tricky to get the sticky stuff off and get them lined up?

Any special tools needed?

Liking the look of it and may do mine if not too difficult to do nicely, is there an updated vogue badge too? There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

Did you not see the Titanium Vogue badge in the pics n this thread?

How i dont fall down more astounds me.........totally right Gaz. Missed it. Looks good! There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

pld118 - I changed my badges from gloss black to titanium as I fancied a change. The pictures below are just from my phone so not the best!

Thanks NKSC.

That's given me a likely glimpse into my future

Just be careful when buying the lettering as I bought mine from eBay and The "RANGE" template was curved for the front bonnet on both sets and the "ROVER" was straight on both sets. So i had to adjust them to suit.

Took you long enough to get round to it mind....  Discovery 4 HSE
1998 110 TUM HS FFR Hard Top XD WOLF
1982 Series 3 Hard Top

*Gone:L462 D5 HSE LUX, L663 Defender 110 HSE, Discovery 3 HSE, 2014MY Range Rover Sport 5.0 Supercharged AB Dynamic; L405 Exec Vogue SE 4.4, 5.0 Supercharged Autobiography, Defender TDCi XS CSW, Defender TD5 HT, Vogue SE TDV8, Vogue TD6, RRSport SC 4.2V8, Classic 3.9 Vogue Auto, Land Rover Series 3 SWB

Cheers NKSC.. Think the titanium looks more in keeping than the black but.. Going to leave the car as is/ completely original as its looking good as is and if its not broken!

Does anyone know if you can remove the lettering already on the boot. Then re use it. As the person that had it before me made the lettering too close together.

Also when pulling them off can it damage paint?

the letters put on in the factory are easy to get off, but if they have been put on by an individual then it depends on what adhesive they have used .. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

STUPID QUESTION ALERT! I know that powerfuluk sell a complete set of titan lettering front and rear with the different templates & two removal tools (about £70!). Other sellers on eBay sell the lettering much cheaper with the two different templates too (I've seen them for £16/19 with templates (so no more than £40 for a full set) neither are genuine LR

Question is: I know the templates are different front and rear but are the actual letters? Are they flat for the rear and curved for the front or will curved ones all round be ok?

Thanks in advance ! 2003 Vogue 4.4 V8 Java Black

DTaylor wrote:

Does anyone know if you can remove the lettering already on the boot. Then re use it. As the person that had it before me made the lettering too close together.

Also when pulling them off can it damage paint?

Whats the correct colour letters on a 2011 white car?