Sorry about the hi jack but is there a way of having the full beam h7 on all the time on a 2004 as I am sure I seen this on a Range Rover the other day sort of a drl set up

the iidtool will switch your main on at 60% or 30% brightness as a drl.. ... - .- -.




Y. O. L. O.
.

Well I went in to main stealer on way home from work and asked if they could turn my main beam into DRL and they looked at me like I was making it up so about ten minutes later the young apprentice came back over said I was correct and it can be done but they don't know how they are going to look in to it and call me back fingers crossed

They will charge a small fortune for doing a 5minute job 😯 FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

surely an iidtool must be a certain purchase steveo, it'll save you loads of money .... ... - .- -.




Y. O. L. O.
.

Cam-Tech-Craig wrote:

Wifeys 2015 D4 facelift headlamps do NOT have a separate full beam light! One bi-xenon light that does both headlamp & full beam! NO problem with flashing them either!

Craig when you said this I thought that it was a special non standard up grade, not factory spec Ewok on steroids, that shows just how interested I am........ red that it wouldn't pull 3.5 tons, NEXT !  Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

At the risk of hijacking my own thread, main dealer charged me £120 to make a change to the ccf, I immediately bought an IIDTool to reverse it as SWMBO didn't like it.

Probably two morals here
1. SWMBO MBO
2. Buy an IDTool ASAP

 Geoff

what did you disable then Geoff.. ... - .- -.




Y. O. L. O.
.

Two touch unlocking, she got fed up of being left standing at the pavement whilst I drove off so I set it back to one touch unlocks all the doors. I might not need an IIDTool to do this on my more recent machine but this was on the red one (still my favourite) I am interested in setting up the headlight main beam as a drl, when I get the right colour light that it - as if by magic back on topic  Geoff

 ... - .- -.




Y. O. L. O.
.

I have news lol after sitting at main dealers for about 2hrs the tec came out to see me and said that the main beam can't be used as drl as there is no option to do it so my next question is there any body in Essex are with a multi vin iidt tool cheers

IID - I run my 'main beam' (i.e. the useless ones next to the actual bi-xenons!) all the time as DRL's. Have some photos somewhere - however if yours is the BMW era (i.e. pre 2005/6 facelift) then I'm not so sure if it can be done as easily. Land Rover Addict
XXXXXXXXXXXXXXXXXXXXXXX

Previous
XXXXXXXXXXXXXXXX
2009 5.0V8SC Autobiography
2006 4.2V8SC Autobiography
2004 4.4V8 Vogue

Steveo wrote:

I have news lol after sitting at main dealers for about 2hrs the tec came out to see me and said that the main beam can't be used as drl as there is no option to do it so my next question is there any body in Essex are with a multi vin iidt tool cheers

Pop over to DISCO3 and speak to member "geoff." (note the full stop). He's based in Kent but I think he gets to Essex quite often and can sort it for you.  Visiting from DISCO3.CO.UK
Discovery 3 TDV6 Auto HSE Zambezi Silver

Tried some of the H7's from stan's link, no "whiter" than the ones I already had, still yellowy. Never mind I have some spares now  .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999