Hi Folks.
A mate of mine is having gearbox problems which looks like it's caused by overheating. We have changed the oil and filter but the problem is still there. We are now thinking it could be a blockage in the cooler or lines?
Does anyone know if it's possible to flush out the cooler and lines and what is the best way to do it or is it best to replace with new components?
Thanks in advance.
Gary

I wouldn't mess about flushing
I would replace

I replaced the pipes , cooler and oil cooler thermostat housing when I rebuilt my transmission and you need to make sure the bottom rows of your main radiator aren't blocked as it feeds the cooler as this is the common reason for the over heat
Island 4x4 was best when I did mine.
You could check the main rad first but for peace of mind for my new transmission I did the lot

Replace it is the only sure fire way sir

Yep mine was the same, changed the oil cooler, both pipes, the manifold it sits in and it's thermostat, also changed the rad..

See this post for checking your mates rad....

http://www.fullfatrr.com/forum/topic28293.html Pete
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
-Click here for Thread-
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click here for Project Fatty off roader-

Thanks folks.
I will let you know how things progress.