![]() | Home > Maintenance & Mods (L322) > FFRR Service |
|
|
|
| Realist Member Since: 13 Feb 2016 Location: Wales Posts: 436
|
Guys,
|
||
|
| stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35874
|
insufficient oil in the engine me thinks......check the level and see if theres any in there..... ... - .- -.
|
||
|
| Realist Member Since: 13 Feb 2016 Location: Wales Posts: 436
|
Should be I hope it's just been changed within the last 2 hrs.
|
||
|
| mr_spock Member Since: 07 Apr 2016 Location: Welwyn, Hertfordshire Posts: 311
|
He wouldn't be the first person to put new oil in with the drain plug on the bench |
||
|
| Realist Member Since: 13 Feb 2016 Location: Wales Posts: 436
|
Just checked oil it's clean and on the full mark 😡
|
||
|
| Realist Member Since: 13 Feb 2016 Location: Wales Posts: 436
|
Is it safe to drive with the above message showing up. Range Rover quotes.....
|
||
|
| Realist Member Since: 13 Feb 2016 Location: Wales Posts: 436
|
Took the car for a little drive and as soon as its driven the message disappears but as soon as you stop the message pops back up on the dash. Range Rover quotes.....
|
||
|
| Mikey Member Since: 10 Jan 2008 Location: Dundee Posts: 1883
|
Replace the oil filter with an OEM one, and make sure it's fitted properly |
||
|
| Realist Member Since: 13 Feb 2016 Location: Wales Posts: 436
|
The filter is by Britparts all the cars filters was changed as a service pack.
|
||
|
| Lost for Words Member Since: 18 Jun 2015 Location: Warminster, Wiltshire Posts: 473
|
Britpart? Get rid of it quickly! Visiting from DISCO3.CO.UK
|
||
|
| Realist Member Since: 13 Feb 2016 Location: Wales Posts: 436
|
Thought Britparts was ok? Range Rover quotes.....
|
||
|
| Lost for Words Member Since: 18 Jun 2015 Location: Warminster, Wiltshire Posts: 473
|
They sell some decent stuff, but they are known as "$hitpart" for a reason and I would never use anything but an OEM oil filter. |
||
|
| Realist Member Since: 13 Feb 2016 Location: Wales Posts: 436
|
Me not machanical minded so where is the sensor!
|
||
|
| Mikey Member Since: 10 Jan 2008 Location: Dundee Posts: 1883
|
Take the filter out, and replace it. Doesn't matter if it's tight |
||
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis





