Does anyone have the internal diameter for the silicone replacement inlet manifold hoses please ?

70mm. I bought a 500mm length off Amazon for £10.91.

Many thanks,

Did you cut to same size as existing ?

I think I did them just 2mm shorter to get them on because the silicone is stiffer than the originals. Make sure you use plenty of silicone lube or they will fight you.

Thanks for advice

got to do my oil cooler gaskets so will change these when i do it thanks for the info 2012 Vogue 4.4 TDV8 - Current
2014 Navara V6 - Gone
2004 Vogue TD6 - Gone
Grand Cherokee - Gone
Discovery V8 (LPG) - Gone
Discovery TD5 - Gone

You have to buy it in a 1 metre length and then cut to size (I used the large jubilee clip as a guide. Unfortunately you end up with quite a lot left over which just sits on the shelf taking up space.

If you want a cut off from my remaining "stock" in exchange for a few beer tokens ping me a PM and I will sort something out.

Cheers,

MM 2011 TDV8 AB
2006 TD6 AB (Gone to Wales)

I brought these https://www.ebay.co.uk/itm/Silicone-Hump-H...2749.l2648
will just trim to length 2012 Vogue 4.4 TDV8 - Current
2014 Navara V6 - Gone
2004 Vogue TD6 - Gone
Grand Cherokee - Gone
Discovery V8 (LPG) - Gone
Discovery TD5 - Gone