![]() | Home > Technical (L322) > New L322 owner . Air suspension Woes. |
|
|
|
| nicksaab Member Since: 28 May 2013 Location: Wimbledon and West Wales Posts: 560
|
After battery change you need to reset the suspension. With engine running turn the steering wheel all the way to the left and then all the way to the right - the suspension will reset and the lights go out.
|
||
|
| m666blp Member Since: 08 Aug 2019 Location: cumbria Posts: 10 |
Many thanks . |
||
|
| DrRob Member Since: 16 Apr 2015 Location: Petersfield, Hampshire Posts: 4352
|
Research and find a good local independent LR specialist who are tried and trusted. Search on here and on the sister forums especially the Disco 3/4 one. There is bound to be one or two near you |
||
|
| m666blp Member Since: 08 Aug 2019 Location: cumbria Posts: 10 |
Thanks . There are a couple of good local specialists which I use where necessary. I like to do the majority of the mechanical work myself, unfortunately time pressures etc hinder progress , I’m sure this is the case for most people though.
|
||
|
| MikeO Member Since: 02 Jan 2018 Location: The Cotswolds Posts: 548
|
Does the compressor run at all?
|
||
|
| m666blp Member Since: 08 Aug 2019 Location: cumbria Posts: 10 |
The compressor does not appear to work at all . I have reset with lock to lock and still message and no light on suspension switch . Fuse is good .
|
||
|
| knares Member Since: 22 Jun 2017 Location: Perth WA Posts: 836
|
is it right down on the stops
|
||
|
| m666blp Member Since: 08 Aug 2019 Location: cumbria Posts: 10 |
Yes , right down on the stops . 2003 tdv6 vogue |
||
|
| Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6434
|
Any orange lights around the height selector ?
|
||
|
| m666blp Member Since: 08 Aug 2019 Location: cumbria Posts: 10 |
No lights on suspension switch at all .
|
||
|
| m666blp Member Since: 08 Aug 2019 Location: cumbria Posts: 10 |
So I took it took Trojan and they cleared all the faults and away it went again |
||
|
| Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6434
|
You need to know what the hard faults are, there could be a problem ? .
|
||
|
| knares Member Since: 22 Jun 2017 Location: Perth WA Posts: 836
|
you need your own scan tool RR 2005 4.4 petrol
|
||
|
| Harris Member Since: 02 Apr 2013 Location: Northants Posts: 155
|
Get a good battery they misbehave badly with current drops |
||
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis







