 | Home > Maintenance & Mods (L322) > Rear wheel arch/sills |
 
|
|
|
| mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 7641   
|
https://www.fullfatrr.com/forum/topic56918.html
|
||
2nd Oct 2020 4:58pm |
|
| mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 7641
|
Not really any sill though....
|
||
|
2nd Oct 2020 4:59pm |
|
| Ianb4310 Member Since: 21 Sep 2017 Location: Gainsborough Posts: 200
|
I did see that thread but it’s not the one I was thinking of ! I’m sure it had a picture with a part of the sill joining the arch |
||
|
2nd Oct 2020 5:16pm |
|
| mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 7641
|
Can’t remember that, but there was one where someone had made their own or got a body shop to make it with the sill, but not an off the shelf panel. 2011 Range Rover Vogue SE 4.4 TDV8
|
||
|
2nd Oct 2020 5:26pm |
|
| Ianb4310 Member Since: 21 Sep 2017 Location: Gainsborough Posts: 200
|
Ok I must have been mistaken 😢 is the only option to fabricate the patch? |
||
|
2nd Oct 2020 6:52pm |
|
| mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 7641
|
I believe so. 2011 Range Rover Vogue SE 4.4 TDV8
|
||
|
2nd Oct 2020 6:56pm |
|
| northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8479 
|
I think there was a bit of chat that someone was interested in trying to fabricate something but I think at the mo it’s down to either finding a body shop who can fabricate something or buy a cut out section from a good car. There is nothing that can't be fixed with a hammer😜😜
|
||
|
2nd Oct 2020 6:57pm |
|
| Ianb4310 Member Since: 21 Sep 2017 Location: Gainsborough Posts: 200
|
Thanks I think this is going to be expensive only just bought the car and took it to body shop to sort rust bubbles out |
||
|
2nd Oct 2020 6:59pm |
|
| nfm Member Since: 09 Apr 2019 Location: UK Posts: 19
|
There was a thread (not sure where) where the owner found a donor car in the scrappers and cut out the arch and sill ends in one big piece. An option if you can find a non rusty donor. |
||
|
2nd Oct 2020 7:12pm |
|
| bigbo Member Since: 07 Jul 2014 Location: Derbyshire Posts: 541
|
Is this the thread you want?
|
||
|
2nd Oct 2020 9:16pm |
|
| northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8479
|
That’s the one I was thinking of👍🏻 There is nothing that can't be fixed with a hammer😜😜
|
||
|
2nd Oct 2020 10:00pm |
|
| Ianb4310 Member Since: 21 Sep 2017 Location: Gainsborough Posts: 200
|
is this the right thing ?
|
||
|
3rd Oct 2020 1:14pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
