![]() | Home > Maintenance & Mods (L322) > Axle shaft: OEM or aftermarket? |
![]() ![]() |
|
|
lschwarcz Member Since: 18 May 2019 Location: Hillsboro, OR, USA Posts: 273 ![]() ![]() ![]() |
Hi everyone,
|
||
![]() |
|
lschwarcz Member Since: 18 May 2019 Location: Hillsboro, OR, USA Posts: 273 ![]() ![]() ![]() |
northernmonkeyjones,
|
||
![]() |
|
northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8760 ![]() ![]() ![]() |
Try a direct email, they don’t list much on their site it’s a more 1 to 1 thing.
|
||
![]() |
|
400-ascona Member Since: 25 Jan 2018 Location: Midlands Posts: 65 ![]() ![]() ![]() |
The knuckle on the end of the driveshaft can be replaced fairly easily (excepting that they rust into the splines!). I did mine. Rob. 05 L322 4.2SC
|
||
![]() |
|
Norm Member Since: 25 Jun 2018 Location: Mississauga. Ontario. Posts: 32 ![]() ![]() ![]() |
I did both my front cv/drive shafts a few months ago. I used Atlantic British, I'm pleased with their service and so far so good. Now that I've got the experience I think if I ever have to do them again I'd just buy a "service" kit, way cheaper and not to difficult. |
||
![]() |
|
lschwarcz Member Since: 18 May 2019 Location: Hillsboro, OR, USA Posts: 273 ![]() ![]() ![]() |
Thanks for all of the input! The only aftermarket unit that was recommended by at least two people was British Atlantic. But, theirs was out of stock and would have been about $400 USD once you include shipping. I ended up ordering the OEM axle from a local Land Rover dealer for $585 USD plus sales tax (VAT for those of you in the UK ![]() Thanks again! Larry. 2009 Range Rover L322 Autobiography Bournville/Ivory Save lives, give blood. |
||
![]() |
|
fanders Member Since: 10 Jul 2013 Location: Hants, UK Posts: 318 ![]() ![]() ![]() |
Any chance of a picture of your Rangie, Larry? Bourneville with a light interior is a lovely combination!
|
||
![]() |
|
lschwarcz Member Since: 18 May 2019 Location: Hillsboro, OR, USA Posts: 273 ![]() ![]() ![]() |
Hi fanders,
|
||
![]() |
|
darrenm Member Since: 06 Jan 2015 Location: chorley Posts: 188 ![]() ![]() ![]() |
I replaced the gaiter and cv joint today ( 50 mins start to finish ) |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
