![]() | Home > In Car Electronics (L322) > Help disconnected optical now no sound no aux |
![]() ![]() |
|
|
knares Member Since: 22 Jun 2017 Location: Perth WA Posts: 800 ![]() ![]() ![]() |
i had that problem, did what you have done and its been fine for several years now
|
||
![]() |
|
Lefty84 Member Since: 11 Sep 2024 Location: Essex Posts: 15 ![]() ![]() ![]() |
Is there a reset?
|
||
![]() |
|
Lefty84 Member Since: 11 Sep 2024 Location: Essex Posts: 15 ![]() ![]() ![]() |
Also, is this supposed to be connected to something? |
||
![]() |
|
Lefty84 Member Since: 11 Sep 2024 Location: Essex Posts: 15 ![]() ![]() ![]() |
|
||||
![]() |
|
knares Member Since: 22 Jun 2017 Location: Perth WA Posts: 800 ![]() ![]() ![]() |
no idea what that is, is that in the rear left side RR 2005 4.4 petrol
|
||
![]() |
|
Lefty84 Member Since: 11 Sep 2024 Location: Essex Posts: 15 ![]() ![]() ![]() |
Yes. I didn’t unplug it and I can’t see where it goes. I have a feeling it’s factory and for a piece of equipment that’s not on a 2006 vogue se. |
||
![]() |
|
pcourtney Member Since: 14 Jan 2020 Location: Stansted Posts: 936 ![]() ![]() ![]() |
using a factory made Car Fiber Optic Loop Connector MOST Network fits AUDI BMW MERCEDES PORSCHE would be useful, you can then test one piece of equipment at a time, could be the Bluetooth module at fault, could be something else
|
||
![]() |
|
Lefty84 Member Since: 11 Sep 2024 Location: Essex Posts: 15 ![]() ![]() ![]() |
I picked up a bypass for the most.
|
||
![]() |
|
pcourtney Member Since: 14 Jan 2020 Location: Stansted Posts: 936 ![]() ![]() ![]() |
I think it would be wise to test one device at a time, and see if optic light is on at every point in the chain, something in your fibre connected MOST device chain is playing up
|
||||
![]() |
|
knares Member Since: 22 Jun 2017 Location: Perth WA Posts: 800 ![]() ![]() ![]() |
is there a plan for the fibre optic.
|
||
![]() |
|
pcourtney Member Since: 14 Jan 2020 Location: Stansted Posts: 936 ![]() ![]() ![]() |
see the graphic above, it goes in a clockwise direction - Device 1 to Device 9 ( the ampflifier) in a fully working MOST fibre ring |
||
![]() |
|
Lefty84 Member Since: 11 Sep 2024 Location: Essex Posts: 15 ![]() ![]() ![]() |
I GOT IT WORKING.
|
||
![]() |
|
knares Member Since: 22 Jun 2017 Location: Perth WA Posts: 800 ![]() ![]() ![]() |
ok thanks
|
||
![]() |
|
pcourtney Member Since: 14 Jan 2020 Location: Stansted Posts: 936 ![]() ![]() ![]() |
You might have a dirty fibre end connection, which is why the AHU ( Audio Head Unit) keeps resetting itself, try to clean each connection along the route with lint free wipes or some isopropyl alcohol, it must be very clean for the fiber optic light signal to operate correctly along the route. |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
