is a facelift conversion as easy as removing the old bumper lights etc and fitting the facelift bits...any body mods required and are the sockets/plugs the same...any advice would be appreciated.. ... - .- -.




Y. O. L. O.
.

Good step by step here sir


http://www.pistonheads.com/gassing/topic.a...r+to+2010+ Present :2008 TDV8 HSE
Gone Audi A5 2.7TDI
Gone Discovery 3 HSE
Gone Mercedes CLK
Gone Range Rover 2.5 DSE

thanks ..although thats a 2010 conversion it does show the way to do it..  ... - .- -.




Y. O. L. O.
.

Are you after a facelift Stan, have you ever thought about liposuction, I hear it can make a massive reduction and prices are reasonable

 ... - .- -.




Y. O. L. O.
.

lipo to the face =


 You can paypal direct using - www.paypal.me/duckworthparts
Please supply your full name address when sending a paypal payment.
https://www.facebook.com/duckworthparts
www.duckworthparts.co.uk
My Direct Line: 01673 849873
Email: robin.hall@duckworth.co.uk
Supplier of Genuine Land Rover & Jaguar Parts For All Models

Sent a long PM, Stan. 
RRC 2Dr, RRC 4Dr,
P38, and 2 L322s
(wife thinks I'm nuts - prob right, too)

Scarey you looking at the 06 -09 conversion then ... why didnt you say so will get on it! Present :2008 TDV8 HSE
Gone Audi A5 2.7TDI
Gone Discovery 3 HSE
Gone Mercedes CLK
Gone Range Rover 2.5 DSE

its a 2006 front bumper/lights etc i'm thinking of fitting ..not sure at the moment.. ... - .- -.




Y. O. L. O.
.

Do it, Do it, Do it!

You will need 2 headlamps (the more basic the easier the wiring)
Bumper
Bumper reinforcer
Plastic front support panel
front wheelarch liners
2 wing corner bumper support brackets
foglamps + wiring
Headlamp wash system (new pump and pipework from Land Rover) will be MOT requirement in 2012!

Strip off the existing front end and bin it. Cut off the front wing lips and weld or bond the inner and outers back together. Modify lower wing to bumper brackets to fit. Modify wiring, Bolt on all new parts. Around 10hrs to do this job for an experienced converter... Allow a couple of days if its your first time...

Its a lot of work but well worth the effort...


Speak to Simon at powerfulluk.com he sells plug and play looms for the headlights...



Thats what i have been told to do

Don't forget to let your insurance company know of the modification

@delamo....

@w88dym..[strange name ]...  ... - .- -.




Y. O. L. O.
.

I have just started to get bits together
hope it look good when i have done it

scarey wrote:

@w88dym..[strange name ]...

Registration number