Home > Maintenance & Mods (L322) > Lettering |
|
|
paulmoran2 Member Since: 27 Nov 2013 Location: Leeds Posts: 1422 |
I used Powerful Uk for both my front and rear Titanium lettering . They come with the front / rear templates to suit and the quality is very good in my opinion. I would recommend purchasing the Toffee wheel to assist with the old backing / adhesive removal, but do not apply too much pressure, as the panel / paint could be damaged. GONE 2010 Facelifted 3.6 TDV8 - Stornoway Grey + 22" Overfinch Olympus
|
||
8th Jan 2015 6:56pm |
|
Cam-Tech-Craig Member Since: 04 Aug 2011 Location: Gloucestershire Posts: 16176 |
I have a couple of used standard exhaust systems & a couple of slightly used (almost new) SC stainless back boxes if of interest sir |
||
8th Jan 2015 7:39pm |
|
horse86 Member Since: 09 Dec 2014 Location: PA Posts: 860 |
is this towards me? Pardon my confusion (I'm state side) but what are you talking about? Are you saying used Titan lettering for front and back and templates? If so I need to go new letters as I need fresh double sided adhesive cut to the letters so it adheres properly. |
||
8th Jan 2015 8:18pm |
|
horse86 Member Since: 09 Dec 2014 Location: PA Posts: 860 |
So the front (hood) letters definitely have a curved back side and the rear (trunk) letters are completely flat? Can you tell Powerful from OEM letters if they were side by side? |
||
8th Jan 2015 8:20pm |
|
paulmoran2 Member Since: 27 Nov 2013 Location: Leeds Posts: 1422 |
Yes. The templates are curved for the front (hood) and straight for the rear ( trunk)
|
||
8th Jan 2015 9:42pm |
|
horse86 Member Since: 09 Dec 2014 Location: PA Posts: 860 |
ok so that answers for the templates.....but in regards to the actual letters ie the fronts are curved/have a bend to them and the rears are completely flat.
|
||
8th Jan 2015 10:01pm |
|
paulmoran2 Member Since: 27 Nov 2013 Location: Leeds Posts: 1422 |
The fronts are curved but will have a look at the rear tomorrow at the rear and reply GONE 2010 Facelifted 3.6 TDV8 - Stornoway Grey + 22" Overfinch Olympus
|
||
8th Jan 2015 10:05pm |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 7914 |
Chop the exhausts off or get some genuine ones back on, they look really silly to me....
|
||
8th Jan 2015 11:21pm |
|
Cam-Tech-Craig Member Since: 04 Aug 2011 Location: Gloucestershire Posts: 16176 |
Exhausts sir The OP is in Lancashire UK... |
||
9th Jan 2015 1:12am |
|
Philip Member Since: 05 Jan 2010 Location: UK Posts: 2518 |
Hacksaw? |
||
9th Jan 2015 1:53am |
|
paulmoran2 Member Since: 27 Nov 2013 Location: Leeds Posts: 1422 |
horse86. The powerful uk lettering appears to have a curved backing profile to the hood (as the surface is curved) and they are laid in a banana curve too to follow the hood shape.
|
||
9th Jan 2015 2:42pm |
|
horse86 Member Since: 09 Dec 2014 Location: PA Posts: 860 |
Thank you for looking There is so much misinformation and varying parts with these letters. Driving me nuts lol. Everywhere else I've seen says the rear letters lay flat and the fronts are curved (do not lat flat). I don't want to mistakenly get a flat set and them not stick b/c the surface of the hood/or trunk is curved. |
||
9th Jan 2015 2:58pm |
|
supershuttle Member Since: 20 Mar 2011 Location: Lancashire Posts: 3654 |
|
||||||
9th Jan 2015 3:28pm |
|
paulmoran2 Member Since: 27 Nov 2013 Location: Leeds Posts: 1422 |
To help?....picturesof the PUK lettering
|
||||||
9th Jan 2015 5:24pm |
|
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis