Advertise on fullfatrr.com »

Home > Maintenance & Mods (L322) > Front door
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
mudknight



Member Since: 21 Sep 2012
Location: birmingham
Posts: 73

2003 Range Rover Vogue Td6 Java Black
Front door

How do I get my passenger door open to replace the lock , it's locked and won't unlock for me to open door and replace it , forgot to say , it's a 2003 L322

Post #328010 15th May 2015 7:02am
View user's profile Send private message View poster's gallery Reply with quote
stenh02



Member Since: 30 Jan 2011
Location: Somewhere not warm
Posts: 339

Scotland 2004 Range Rover Vogue 4.4 V8 Rimini Red

http://www.fullfatrr.com/forum/topic31582.html

Any help? Sounds like it could be the dead lock and if it deosn't let go it looks like you need to destroy the door card to get it out.

Post #328023 15th May 2015 8:10am
View user's profile Send private message View poster's gallery Reply with quote
heppsen



Member Since: 14 Feb 2012
Location: germany
Posts: 170

Germany 2012 Range Rover Vogue TDV8 Santorini Black

If your door is jammed in superlock, you have exactly one chance to get at it:

open the rear door behind the affected door,
prise out the rubber bung pictured below from the rear face of the front door.

Click image to enlarge


Click image to enlarge


you will find an "allen key bolt" inside which should move downwards
if you pull the door handle (outside one)
(it looks like an allen key bolt but in fact its part of the locks mechanism)

while pulling the outer door handle help the allen key move down with the
help of a 2mm dia long screwdriver/piece of wire
which ideally should have a 90ish degree bent at 10mm from its end.

Click image to enlarge


Click image to enlarge


the next picture shows the "allen key" piece of the door lock which
you need to move down.

Click image to enlarge



Good luck and thanks to DelSilencio-Uli for providing us with the pictures... Thumbs Up

regards
heppsen 2017 MB V-Class
2016 Q7 (gone)
2012 FFRR TDV8
2012 Smart Pulse Turbo
1986 MB W126
1965 LR Series 2A
1961 LR Series 2

Post #328029 15th May 2015 8:55am
View user's profile Send private message View poster's gallery Reply with quote
axle



Member Since: 28 Oct 2007
Location: Perth Perth the end of the Earth
Posts: 2964

Australia 2008 Range Rover Supercharged 4.2 SC V8 Rimini Red

👏Top advice 👌 2008 MY Supercharged
Rimini Red / Jet
four zone climate
remote park heater
and no ugly kid windows.
magnus satis quod turpis satis

Post #328041 15th May 2015 10:32am
View user's profile Send private message View poster's gallery Reply with quote
mudknight



Member Since: 21 Sep 2012
Location: birmingham
Posts: 73

2003 Range Rover Vogue Td6 Java Black

Brilliant ,, I will try that when I'm home , thanks so much , will let you know how I get on 👍

Post #328050 15th May 2015 12:01pm
View user's profile Send private message View poster's gallery Reply with quote
Stephen.125



Member Since: 25 Jun 2009
Location: Frodsham
Posts: 1489

2011 Range Rover Autobiography 5.0 SC V8 Santorini Black

Absolutely brilliant information!

Can this be renamed and Wiki'd?

edit: Thanks Heppsen Thumbs Up

Post #328055 15th May 2015 12:17pm
View user's profile Send private message View poster's gallery Reply with quote
stan
Site Moderator


Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 34871

United Kingdom 

great stuff, wiki'fied... Thumbs Up ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Post #328057 15th May 2015 12:27pm
View user's profile Send private message View poster's gallery Reply with quote
Gazellio @ Prestige Cars



Member Since: 22 Jan 2010
Location: Chilterns, UK
Posts: 11309

United Kingdom 2010 Range Rover SE Td6 Zermatt Silver

Great post - just had a look on mine, it will be hard to get at with the rear door in place but certainly possible with patience!

Post #328060 15th May 2015 12:41pm
View user's profile Send private message View poster's gallery Reply with quote
mudknight



Member Since: 21 Sep 2012
Location: birmingham
Posts: 73

2003 Range Rover Vogue Td6 Java Black

I am working on the car now as said in pics ect , the "Allen bolt " already moves down when pulling on the outside handle , do I need to push it further than it already goes ??

Post #328157 16th May 2015 9:50am
View user's profile Send private message View poster's gallery Reply with quote
heppsen



Member Since: 14 Feb 2012
Location: germany
Posts: 170

Germany 2012 Range Rover Vogue TDV8 Santorini Black

yes, that should open the lock.
At least it did on all occasions I know of.
You will feel a resistance, then the lock opens the door.
You can't push it too far - at least not without brute force.


regards
heppsen 2017 MB V-Class
2016 Q7 (gone)
2012 FFRR TDV8
2012 Smart Pulse Turbo
1986 MB W126
1965 LR Series 2A
1961 LR Series 2

Post #328180 16th May 2015 1:57pm
View user's profile Send private message View poster's gallery Reply with quote
mudknight



Member Since: 21 Sep 2012
Location: birmingham
Posts: 73

2003 Range Rover Vogue Td6 Java Black

I've finally done it ,, the way you described only opens the door if the outside handle cable is broke , the way to open the lock when it's locked is to go in from the top , pull the door card away at the top far as you can , window up or down makes no difference , remove air bag , pull away inner foam protection stuff , get a screw driver and hammer , knock through the plastic on the top of the lock , it exposes the lever which you need to push down to unlock the car , you then can only open the door from inside ,,
Thanks for all your help and advise lads , very handy too know fellow Range Rover owners help each other , thanks again ,, untill the next problem, lol

Post #328181 16th May 2015 2:06pm
View user's profile Send private message View poster's gallery Reply with quote
gregdav



Member Since: 26 May 2014
Location: just north of stafford
Posts: 1077

England 2005 Range Rover Vogue Td6 Bonatti Grey

I know that it's an old thread, and wiki'fied, but thought I would give my thanks to this brilliant forum for helping me out.
My drivers door lock has never been good since replacing the cable from the outer door handle.
First sign of frost and it won't open, so I turn to the wiki and look for a solution.
We have mudknight and heppsen, thank you guys.
I used heppsen's solution first, worked a treat, but only once. It appears that it only works once, so I ordered a new lock from the bay of e, s.
these appear to be lr only, this is the number I ordered.


So i set about butchering my door card, as mudknight says undo 30 torx head from behind airbag, then prize the door card back, my door was locked, so this I found was easier with the window down, then , wedge the door card open and unscrew the airbag.lift aside and make sure it is safe, I hung mine on a piece of wire. Then peel back the inner guey trim, you can then see the top of the lock.
I found window up was best as you can see more of the lock, working from inside the car I wedged the door card open with my quater drive ratchet and placed the led torch light on top.
You can see the mechanism from here, you need to look below the key lock to the plastic cover, be careful what you hit as the new lock doesn't come with the lock cover, you need to look at the new lock to place your blows.
the window trim where it slides up and down will also need to be pushed aside, it's a good idea to have long screwdrivers for this.
my old lock.

As you can see I have knocked out the top plastic cover, the gold lever is exposed, THIS IS THE MOTHER YOU NEED TO LEVER TO OPEN THE DOOR. SUCCESS YEAH Very Happy
it ain't easy but keep plugging away and you won't need to destroy the door card.
the allen key head screw, which is left handed, is to reset the lock, I found out from another forum :blub
I had reassembled the lock and everything back in place, bjt before closing the door, I decided to lock the door by moving the locking mechanism first, this is the bit that bites on the door pillar:

If you flip the lock shut , as in closing position, with the door open you can check if the lock is opening ok.
mine seemed a little stiff, as it did open but not brilliant, I flipp the locking lever again and released the allen head lefthand scew in the hole then retighten, this apparently resets the lock, I closed the door and YES !!! SUCCESS.
hope it helps.
Thanks forum and wiki.
Greg. Thumbs Up

Post #413138 11th Nov 2016 8:17pm
View user's profile Send private message View poster's gallery Reply with quote
L19 MUD



Member Since: 02 Jun 2015
Location: Suffolk
Posts: 167

United Kingdom 2009 Range Rover Vogue SE TDV8 Stornoway Grey

I believe I have the same problem as outlined on this post although my car is a 2010 MY and the part number is different (I think the current part number is LR019759 not LR013378 as above)

My external door cable snapped on the front right (drivers) side. I replaced this and checked the operation, all seemed fine, that was until I superlocked it. Now I cannot open the door from inside or outside

As my lock part number is different does the procedure above of breaking the lock from the top also apply? I don't want to break it and then still not be able to open the door

I really don't understand how fitting the cable has caused a problem? Someone else above seemed to notice the issue after cable replacement

Post #474697 3rd Apr 2018 3:14pm
View user's profile Send private message View poster's gallery Reply with quote
L19 MUD



Member Since: 02 Jun 2015
Location: Suffolk
Posts: 167

United Kingdom 2009 Range Rover Vogue SE TDV8 Stornoway Grey

Has anyone done this on a 2010 on car? Have ordered the lock from Dan, just waiting for it to arrive

Getting in via the passenger door is annoying!

Post #475278 9th Apr 2018 7:55am
View user's profile Send private message View poster's gallery Reply with quote
ohuntsman



Member Since: 21 Mar 2016
Location: Surrey
Posts: 337

United Kingdom 2002 Range Rover Vogue 4.4 V8 Zambezi Silver
Opening a stuck lock on the passenger side door

So Today I managed to do this by not destroying the Door Card.

I tried removing the bung to use an allen key to open the door - this did not work. As far as I can tell this technique is if the lock is unlocked and the door handle is not releasing the door.

So I undid the torx in the inside door handle, put the window down & pulled out the window trim at the top of the door card and popped the clips open on the door card - this gave me enough space to get a coat hanger between the window and the door card, used a coat hanger to reach in and pop the small cover off the lock mech, and twisted the coat hanger in to hook the black plastic piece at the top to undo the lock.
This thread explains it best [url] http://www.fullfatrr.com/forum/topic37988-15.html [/url]
I have also made a youtube video to demonstrate that I will post when it uploads - with some poor camerawork but it should give an idea of what to look out for.

No Door card was harmed and the old lock mech was not smashed - just a small flesh wound to my hand!

Post #486090 14th Aug 2018 2:49pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site