Changed my sidelight bulbs to led (TD6) now the headlight bulbs look very yellowish in comparison, can anyone point me in the direction of some headlight bulbs to match.

get some 6000k xenon bulbs of ebay..normally around £20 'ish...

type D2S if memory serves right.. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Yes D2S is correct Stan.
got some for mine, haven't fitted them yet.

thanks greg  ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Thanks, just a straight swap???

yep...

this shows you how to get the headlight out,
 ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Bear in mind, it depends on what colour temperature the LEDs are. 6000k is most common for the best efficacy but not uniform. Mine are circa 5000k to more closely match my preference for better performing 4300k bulbs.

 Visiting from DISCO3.CO.UK
Discovery 3 TDV6 Auto HSE Zambezi Silver

thanks for the how to, my side light LED's are 6000k so will buy some to match.

im guessing the bolts wont come out as easy as on the video though

You don't need to remove the headlights to change the bulbs on a 2003 TD6

^+1, as nicedayforit says, no need to remove the headlight to change the bulb, you can unclip the plastic covers off the back of the lights, undo the connectors to the lamps and unclip the bulb cover with the headlight in-situ.

Be careful though, as putting the new bulbs in can be a bit fiddly, especially on the passenger side as there is a bit less space to work in. And make sure the ignition is off, as the voltage that goes through the Xenon bulbs (28,000 Volts) is not to be messed with.

could anyone who has changed their bulbs to ds2's put a link to some decent ones on the bay, as thers so many i have no idea which to go for.
thanks

go for a UK seller, you'll get them quicker and go for the 6000k bulb..

dont get this type , they wont fit properly,




get this type with the 4 anti rattle strips of metal,





these look ok,
http://www.ebay.co.uk/itm/D2S-ICE-WHITE-XE...SwMmBVud4r ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

There are so many listed on fleabay with prices as low as £10 a pair. However,having gone down that route thinking I've got a good deal, I have become fed up having to replace these "cheap" bulbs within a year or less so have now gone for OSRAM XENARC ORIGINAL

http://www.amazon.co.uk/gp/product/B003VNP...=8-1-fkmr2

which if you use Flubit you can get two for £53.74 with a 4 year guarantee.

Hope this helps

Tim

Unnecessary quote removed

Going to try the cheapies first, if no good will try the expensive ones. Thanks all