fullfatrr.com - View topic - iBus + Resler Interface + Navcoder

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical (L322) > iBus + Resler Interface + Navcoder

Page 1 of 3

Print this entire topic ·

dan_uk_1984

Member Since: 12 Nov 2008
Location: Bude, Cornwall
Posts: 4014

2006 Range Rover Supercharged 4.2 SC V8 Tonga Green

iBus + Resler Interface + Navcoder

For those interested, as you'll know a few months go I bought the Resler Interface. But I was moving house, then xmas happened etc so not had a real chance to have a play with it.

I connected to the CD Changer iBus wire - but an iBus feed is easier to find in the boot. (see info on Resler website) You only need the one iBus wire, and then any ground wire. I used a multimeter to find a handy one.

Hopefully the following should show you exactly what pins to use:

iBus:

Click image to enlarge

Ground:

Click image to enlarge

I've just noticed that NavCoder has a feature to input manual iBus codes:

Click image to enlarge

I'm a sucker for things like this, basically you stick in a code and press transmit and it will do whatever function.

For Example:

3F 06 00 0C 01 31 01 04 driver side mirror fold in
3F 06 00 0C 01 30 01 05 driver side mirror fold out
3F 06 00 0C 02 31 01 07 passenger side mirror fold in
3F 06 00 0C 02 30 01 06 passenger side mirror fold out

3F LL 00 0C 05 00 CK // Move Driver Seat forward
3F LL 00 0C 05 01 CK // Move Driver Seat Back
3F LL 00 0C 00 0B CK // Toggle Locks
3F LL 00 0C 00 08 CK // Open Trunk
3F LL 00 0C 00 02 CK // Activate the Window Washer
3F LL 00 0C 00 10 CK // Simulates Driver Door Open
3F LL 00 0C 00 11 CK // Lights on for 3 seconds then dim
3F LL 00 0C 00 14 CK // Wiper, single swipe
3F LL 00 0C 00 15 CK // Wiper, two swipes
3F LL 00 0C 00 16 CK // Wiper wash only (no wiper motion) about 2-3 seconds

3F LL 00 0C 00 40 CK // Open Trunk
3F LL 00 0C 00 41 CK // Rear Doors Locks ON
3F LL 00 0C 00 42 CK // Rear Doors Locks OFF
3F LL 00 0C 00 43 CK // Open the Gas Lock
3F LL 00 0C 00 44 CK // Lift the Rear Drivers side Window
3F LL 00 0C 00 45 CK // Lower the Driver side window
3F LL 00 0C 00 46 CK // Close the Gas LOCK
3F LL 00 0C 00 47 CK // Lower the Rear Passenger side window
3F LL 00 0C 00 4B CK // Washer Only
3F LL 00 0C 00 51 CK // ALL Locks Off
3F LL 00 0C 00 55 CK // ****** Alarm ON! **** Careful LOUD!! ****
3F LL 00 0C 00 59 CK // Interior Lights off
3F LL 00 0C 00 5B CK // Flashers ON (Interior lights too)
3F LL 00 0C 00 64 CK // Both Rear windows Down
3F LL 00 0C 00 65 CK // All windows DOWN
3F LL 00 0C 00 66 CK // Open Sunroof

8th Mar 2010 10:01pm

Andy

Member Since: 24 Feb 2009
Location: Shropshire
Posts: 2926

Why would you want to do that? 2010 MY Vogue SE TDV8 3.6 Stornoway Grey- fully loaded

9th Mar 2010 4:46pm

dan_uk_1984

Member Since: 12 Nov 2008
Location: Bude, Cornwall
Posts: 4014

Because it's the precursor to programming your own functionality and changing dealer spec options.

9th Mar 2010 5:15pm

Andy

Member Since: 24 Feb 2009
Location: Shropshire
Posts: 2926

oh, ok. Can i make my doors lock when I drive off using this then? 2010 MY Vogue SE TDV8 3.6 Stornoway Grey- fully loaded

9th Mar 2010 5:35pm

dan_uk_1984

Member Since: 12 Nov 2008
Location: Bude, Cornwall
Posts: 4014

Yes, if you can figure it out.

9th Mar 2010 8:56pm

M44K TS

Member Since: 09 Feb 2010
Location: North East U.K.
Posts: 1325

I've just used the USB interface lead with Navcoder and sucesfully enabled tv in motion, had a bit of an issue with my laptop saying com3 was in use but managed to get round that. Seems like a good bit of kit. 2006 Mercedes CLS
1991 Retro-style Mini
But really finding it hard to fight the urge for a S/C...

17th Mar 2010 10:39pm

dan_uk_1984

Member Since: 12 Nov 2008
Location: Bude, Cornwall
Posts: 4014

Where did you take your iBus feed from in the end?

17th Mar 2010 11:06pm

M44K TS

Member Since: 09 Feb 2010
Location: North East U.K.
Posts: 1325

Just plugged it in line with the TV Tuner, connected straight away once I got the laptop sorted. 2006 Mercedes CLS
1991 Retro-style Mini
But really finding it hard to fight the urge for a S/C...

17th Mar 2010 11:39pm

dan_uk_1984

Member Since: 12 Nov 2008
Location: Bude, Cornwall
Posts: 4014

Just remember next time you plug it in it should go into the same USB port, if you put it in a different one the system will assign it a new com number. Not a problem as long as you connect it all up and THEN open Navcoder it should auto detect which com port to use.

D

17th Mar 2010 11:41pm

M44K TS

Member Since: 09 Feb 2010
Location: North East U.K.
Posts: 1325

Yeah cool, I'll remember that. I'm gonna have a play around tomorrow after work. 2006 Mercedes CLS
1991 Retro-style Mini
But really finding it hard to fight the urge for a S/C...

17th Mar 2010 11:55pm

Tesh

Member Since: 27 Feb 2010
Location: Co Durham
Posts: 138

Ive just recieved the Resler Interface and paid for Navcoder and can I hell get it to work
Feel like chucking it in the bin!!!

26th Mar 2010 8:43am

dan_uk_1984

Member Since: 12 Nov 2008
Location: Bude, Cornwall
Posts: 4014

Tesh wrote:
Ive just recieved the Resler Interface and paid for Navcoder and can I hell get it to work
Feel like chucking it in the bin!!!

What wire are you using to get the iBus? CD Changer or in the boot?

Describe the problem...

26th Mar 2010 9:14am

Tesh

Member Since: 27 Feb 2010
Location: Co Durham
Posts: 138

I have fitted an intravee and Alpine ipod controller so its easy enough to get to the ibus lead in the glovebox
Now Im attaching the plug on the end of the loom directly into the Resler USB but Navcoder does not detect the ibus.

Im running Vista and have downloaded the correct drivers

Thanks

Tesh

26th Mar 2010 9:32am

dan_uk_1984

Member Since: 12 Nov 2008
Location: Bude, Cornwall
Posts: 4014

Are you using two wires or three?

In theory one should use iBus, 12v+ and 12v- However that wouldn't work for me, so I just use iBus and 12v-

You checked the photo's above for pin config?

Have you told iBus the correct com port to use? In device manager you should have a com port and a number...

You should aways plug the resler into the laptop before opening up navcoder...

Dan

26th Mar 2010 9:37am

Stebo

Member Since: 14 Sep 2009
Location: Northern Ireland
Posts: 39

2003 Range Rover Vogue 4.4 V8 Giverny Green

I've got this kit and found it pretty straight forward, did manage to blow a few fuses tho

I connceted it up to one of the wires in the boot, took all of 30 seconds. Uncliped one of the plugs, ramed the navcoder wired into the appropriate holes and reconnected the clip. Had the same issues with COM3 being in use, etc but when I changed the USB port everything was fine.

My car is up for sale, I'll take this out of it and sell it to anybody who is interested, the navcoder program is £20 to download though.

26th Mar 2010 9:54am

Page 1 of 3

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum