Maybe you need a drop of whiskey in that tea  Present :2008 TDV8 HSE
Gone Audi A5 2.7TDI
Gone Discovery 3 HSE
Gone Mercedes CLK
Gone Range Rover 2.5 DSE

looking out the window at the weather I would be inclined to agree...

You guys got snow as some is coming down in manc now?? Typical the day before i go away and bet it starts melting sunday morning lol FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

I wish it would snow,hard frost and bitter cold but woke up to rain,rain and more rain but still bitter cold

would love to have had a spin in a bit of the white stuff this morn

Thats not too bad! Im hiring an aygo or othe sh@box to get from Dub to Tralee... should be fun once off the motorways! and with my precious cargos on board  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

I have an SC grille on mine so modding wouldnt be easy pluss you need a good support behind it for pushing into the connector and pulling it off again... Idealy it needs some metalwork support..

Will have to ponder when i come back on sunday night about this and have a poke around. Behind the badge would be ace if a support could be made and a flap for the badge as then it could be hidden and the temp sensor could be relocated easy enough. FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

you would nearly fit the AYGO in the back of the rangie,dont bring too much luggage with you so......

its just heavy rain and due to turn frosty again for your trip at the weekend

having had a wee drop in the tea and dashed out in the rain that lip on the front bumper under the plate recess looks the best bet.Plenty of metal work to weld a bracket onto for the connectors but is subtle enough not to spoil the lines and be seen,and not an issue for accidently bumping into it,now a volunteer is needed to design a bracket and your up and running

double post sorry back button

Last edited by rathbranV8 on 6th Dec 2012 7:37pm. Edited 2 times in total

Its ryan air and aer lingus so handheld only so should be fine in the aygo

Ah well i have full CDW on the aygo so will bump it around like a if its a nail

Will need to see whats behindthe bumper when it next comes off at the local bodyshop  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

kingpleb wrote:

Im thinking RAC/AA style and on the front bumper, the middle lip below the number plate.

.

The AA and RAC have jump posts conveniently placed because they're likely to use them several times a day. It's what they do..

only bonus is its the right size for the crappy little back roads,the poor thing is going to get it bad

Drive it like you rented it  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

There are some brackets on the bay - I have the stand type one on my boat - http://www.ebay.co.uk/sch/i.html?_trksid=p...;_from=R40

I used 175A connectors, the AA and RAC use 350A

nice one

Here's what I did -