Brembo/OE Stanley boy... You'll be chasing poor braking, vibration and squeeks for ever more if you start playing the aftermarket lottery

Been there done it (on many many customers Brembo'd FF's) and they all gave up after spending twice as much on 2 or 3 sets of pads which were crap, then fitted OE...

advice dually taken and it will be the brembo make Craig, thanks..  ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Stan, did this brake grinding noise stop either by own volition or with new pads?

I've noticed in the last couple of weeks that the SC seems to be taking just a fraction longer/ a heavier brake pedal foot to bring it to a halt... and in the last few days I've noticed that on the slow left turn on the approach to our driveway that there seems to be a slow speed, low grind noise from the front end.

I first wondered if this phenomen was anything to do with the 80mph front offside whirling noise/ the chewed looking front offside driveshaft/ hub nut but I suspect it's coincidental and that the brakes just need attention.

The discs look fine but I'll order a set of front Brembo discs and pads this week and start afresh.
.

noisy grind still there Ryan, but only when slow speed brake application...mechanic son scored the pads and it went away for a few weeks but its come back a little..
it'll be new discs and pads on the front when it gets a bit warmer..