Ahh yes, sorry was thinking of another car. forgot the range had studs, I have to confess I don't need anything as the 20" wheels are not _that_ heavy.

I won't edit the post as the replies would seem more incongruous then.. Looks like my embarrassment is there for all to see ad infinitum!

-I've done worse, sorry for the mistake.

The listing does say no shipping outside the US, but when you go thru the checkout, there is an option to request an "exception" and Eric ( the chap at Atlantic British) will send you an eBay invoice for the total including shipping which then allows you to pay via PayPal.

Mine should be here late next week.

P GONE 2010 Facelifted 3.6 TDV8 - Stornoway Grey + 22" Overfinch Olympus
HAVE 1999 Discovery 2 GS 4.0 V8 - Silver - Off Road Toy
GONE 2013 L405 4.4 SDV8 Vogue. Black with Silver roofline and 22" s
HAVE 2015 Jaguar XF.

The Wheel Fitment Alignment Tools arrived in the post (got stuffed for customs charges or £13 so £43 in all )

Tried them
with the OEM 20", OEM 19" and the Overfinch 22" and they worked a treat. Much easier to hang the wheel on and slide it onto the hub centre (being able to hold the wheel from above than lifting IMHO).

130mm in length and 20mm Dia (exact- for you home engineers)

They look good Paul, didn't realise you got two... makes the job a lot easier...

Oh and get your little man in... that wheel is a bit dirty...  Pete
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Yes, 2 in a pack so they line up easier...you'll have to machine a set up in your man-cave Pete

My Man (Ibby)is booked in for tomorrow afternoon whilst i'm at work...he does a great job for a tenner and pot of tea  GONE 2010 Facelifted 3.6 TDV8 - Stornoway Grey + 22" Overfinch Olympus
HAVE 1999 Discovery 2 GS 4.0 V8 - Silver - Off Road Toy
GONE 2013 L405 4.4 SDV8 Vogue. Black with Silver roofline and 22" s
HAVE 2015 Jaguar XF.

Paul, I had a Lathe in the shed for three years and only used it once so I got rid.... could have made them in 5mins  Pete
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-

I have the steel stock and the taps to make these
And I did warn you about customs , personally it's not the vat that gets my goat, it's the post office changing me nearly a fiver to tell me I've got to pay vat. That is just rubbing salt in to the wound. I did have 1 instance were the post office charges were more than the vat  Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

Pete- Typical...go buy a new one now so it can sit idle for 3 years until I get another bright idea for you.

Miggit..You did indeed.Its not good is it, but hey-ho, you live and learn. Could be a nice little side-line knocking those out to forum members. I'm sure you'll have a few PM's about it in due course

My commission is negotiable of course  GONE 2010 Facelifted 3.6 TDV8 - Stornoway Grey + 22" Overfinch Olympus
HAVE 1999 Discovery 2 GS 4.0 V8 - Silver - Off Road Toy
GONE 2013 L405 4.4 SDV8 Vogue. Black with Silver roofline and 22" s
HAVE 2015 Jaguar XF.

Well its been an hour and a half and I've been swamped by 0 pm's, looks like I'll have to go back to winning the lottery  Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

Well I've been a busy boy and I've come up with the MK1!







Wot do ya fink?

I am inclined to make the other 30 mm shorter so that you can pivot the wheel around the big pin to line it up with the second.

You may have also noticed that I have not included a screwdriver slot, at the moment, cos I'm under the impression that if it got stuck, it would be a pair of pliers that you'd go for first. And as I've included a grippy bit, (knurled for those in the know) you should be able to get a hold even with wet hands.

Why is it tapered I hear you ask...Did you watch the Youtube link, the chap didn't half struggle to get the wheel on the pins, I thought that it would be easier to fit a small pin a large hole, said the actress to the bishop!

And that is not the final surface finish, it's naked , it will be blacked when tinkered.

Thoughts please chaps, and be gentle, I've already been bitten in the thumb by some swarf :blub:

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

I only have one thought if I'm honest ;

How much are you charging for a pair ?

They look just the job mate.

You could stamp them with fullfatrr.com......

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

They look the dogs - FOC to members?

Just joking will keep an eye on the thread to see if you decide to make any for sale. Geoff

May I have them monogrammed?

I'll have a couple... Pete
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-

You didn't say if you thought that a short one would be a good idea

And do you think they need a screwdriver slot?

As far as stamping them with fullfatrr.com, or your name, I Love My FFRR, it's do-able, but they would act like a file on ya wheels. So if you want to go down the road in a FFRR that resembles Billy Smarts Clown Car, far be it from me to argue  Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!