Hi All

I was giving the car a car a good clean last night and when I came to the front I noticed that around the front towing eye, the plastic on the front lip is slightly pushed up, making the towing eye cover not fit properly, not sure how this happened, the rest of the front of the car looks fine though- here's a photo where it's just visible-

a close up picture would be beneficial... ... - .- -.




Y. O. L. O.
.

Hi Stan,

Here are some close up images just taken-

looks like the metal tow bit is to high..have you tried taking it off to see whats what.. ... - .- -.




Y. O. L. O.
.

Many thanks for the photo,

Certainly does look like mines too high, I'll pop down and have a look now,

James

That happens with an over zealous recovery driver who has winched it on his truck, chocked the wheels and then tightened the winch again bending the tow point upwards...

If you have a big enough prybar you should be able to pass it through the top of the tow hook, brace it against the front crossbar and bend the tow hook down to where it should be... Pete
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
-Click here for Thread-
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click here for Project Fatty off roader-

Many thanks,

Just been to have a look, certainly does look like that's when happened, seems much higher than it should be.
I've taken the cover off for now, seems to look neater and more straight.

I shall have a look in the garage, see if I have one, if not I'll pop down to the local garage, see if they have one,

Many thanks again

James