![]() | Home > Technical (L322) > Limp mode help please !!! |
![]() ![]() |
|
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8688 ![]() ![]() ![]() |
Sounds like an abs sensor or a height sensor, get the faults read and all will be revealed.... Pete
|
||
![]() |
|
Dogfishdave Member Since: 09 Feb 2016 Location: Bristol Posts: 76 ![]() ![]() ![]() |
Abs sensor, that could be a thought as the dealer that sold it to me had just had new discs and pads all round the day before he dropped it off to me.
|
||
![]() |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35747 ![]() ![]() |
did you set the steering parameters when you fitted the new battery?....[how to in the wiki].. ... - .- -.
|
||
![]() |
|
Dogfishdave Member Since: 09 Feb 2016 Location: Bristol Posts: 76 ![]() ![]() ![]() |
Hi Stan, I am not sure as the dealer did it when I asked him to look at the faults.
|
||
![]() |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35747 ![]() ![]() |
can do...leave it disconnected for a few hours then reconnect and turn the steering wheel fully left and then fully right.. ... - .- -.
|
||
![]() |
|
Dogfishdave Member Since: 09 Feb 2016 Location: Bristol Posts: 76 ![]() ![]() ![]() |
Stan, will I need to enter a radio code or any thing like that or just disconnect both sides and reconnect a few hrs later.
|
||
![]() |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35747 ![]() ![]() |
no code needed... ... - .- -.
|
||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8688 ![]() ![]() ![]() |
Make sure you follow the correct battery disconnect procedure, not doing so can be expensive and dangerous...
|
||
![]() |
|
Dogfishdave Member Since: 09 Feb 2016 Location: Bristol Posts: 76 ![]() ![]() ![]() |
Thank you both I will try it tomorrow. Thing is because the fault is very intermittent you can't tell if it's fixed.
|
||
![]() |
|
Cam-Tech-Craig Member Since: 04 Aug 2011 Location: Gloucestershire Posts: 16366 ![]() ![]() ![]() |
Where in Brizzle are you Dave? |
||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8688 ![]() ![]() ![]() |
Oh yeah, didn't notice you were down that way, pop in and see Craig, he's a top bloke who can sort it for you.... |
||
![]() |
|
Dogfishdave Member Since: 09 Feb 2016 Location: Bristol Posts: 76 ![]() ![]() ![]() |
Hi Craig. Live in nailsea but work bs2.
|
||
![]() |
|
Dogfishdave Member Since: 09 Feb 2016 Location: Bristol Posts: 76 ![]() ![]() ![]() |
Quick update, took the car to a local Indy today, he rang me and said the code was pointing to low fuel pressure. He said take it away and use it for a while, he would give me a ring when he has time to look into it more.
|
||
![]() |
|
rar110 Member Since: 09 Aug 2014 Location: Brisbane, Australia Posts: 1119 ![]() ![]() ![]() |
11.5v is discharged and will affect a L322 tdv8.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
