Measure ride height from centre cap to wheel arch and I have 2" difference from front to back . 20" front and 18" back. Anyone had similar ? I believe correct heights are 20 3/4" front and 20" rear. Cheers

From a member of another forum
Measure from bottom edge of wheel arch centre point to the bottom of the wheel rim straight through the wheel centre
18" wheels 741 f 731 r
19" 753 f 743 r
20" 767 f 757 r
Measured in mm at standard height

from our forum,

Thanks for info , looks like front to back diff is 10mm in normal height , anyone tell me how to adjust it as I have 50mm

@ mac1971

Looks like you are too high at the front (508(20.75in) not 493) and too low at the back (457(18in) not 483)

Suggest keep checking for now, do some ups and downs with the heights, but may need setting with your All Comms or IID Tool  .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

Thats very interesting!

Just rushed out to measure mine. Rear correct for 20inch wheels, front at the 19inch height.

I new something had changed after I had the tyres changed!

Cheers, Jerry THIS WRECKAGE

Okay I have taken measurements at all heights and basically I'm missing about 12mm from the front.

In other words the car is sitting almost level, front to rear.

It used to be okay but something has changed since I had the tyres changed (all four wheels were lifted of the ground at the same time).

Can anyone advise what is the best way to re set? I have Hawkeye but realised I need a differing cable, I think. My indie has Auto Logic.

Cheers, Jerry THIS WRECKAGE