Hi
I've managed to snap off the thin plastic pipe of my coolant hose LR029140 on our 4.4 TDV8. Does anyone have one of these they don't need and are selling cheap as I only need a bit of it.

Thanks

It's an easy one to snap, quite a few people have repaired theirs with a stent.

. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

Last edited by GGDR on 21st Feb 2019 10:57pm. Edited 1 time in total

I tried fixing it with some glue and that lasted less than 5 seconds. It's about £85 for the new pipe and I only want that plastic bit. I might have to bit the bullet but will only change the little bit I need and not faff about with the other pipes.

Thanks

There is a repair posted on here by, IIRC, by JCW. As GGDR says, it's a stent repair.

https://www.fullfatrr.com/forum/topic48509.html?highlight=stent


If you need a new part it's £80+ and I suspect anyone here will keep the bit if they have it as a safeguard. Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT

That's great. i'm going to have a go at that. Out of interest I've looked on ebay for a female to female coax connector but cant find one. Is it a hard to find bit?

Found it, so it's called an F type connector.!!!

Let us know how you get on. A repair like that which saves some plastic pounds for other things is welcome  Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT

I've just ordered a connector from ebay. 99p delivered, great. My sort of price range.!!! Will report back once I've done it. Getting the blasted thing to even run was a mission but it sounds pretty good for 143K!!!!