Patrick
No I didn’t.

The first problem was the power connector. The DAB+ unit has a four pin connector. I used a meter to find the Batt and Earth connections and rigged up power. All other connections are the same.

DAB still appears on the screen muni, but I couldn’t select it and therefore couldn’t "see" the u it it tune it. I tried it with a second unit of exactly the same software level as the OP, still no luck.

I’m now looking at a Dension DBU3GEN, which plugs into the USB socket.

I wonder if swapping out a DAB module for this DAB+ module will work.

I might try it. Could easily sell the module again if it doesn't work.

Does swapping out for orig DAB unit for CPLA-14F720-BM (DBAB+ per this thread) actually work in a 2011 L322?

It didn't work for me (2012 Westminster).

It appeared on the menu, but I couldn't select it.

YMMV

thanks - anyone have a scooby of how this chap got it done then??

Re: upgrade to DAB+ Report post

chief64 wrote:
Upgrade done, install new DAB+ unit CPLA-14F720-BM, working good.

Where exactly is the DAB module?

near side rear cubby, location pics are on page one.. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Thats just a picture of the cubby. Where in there is the module?

Does anyone know if there is a DAB+ adapter that might cast to the bluetooth?

i'm pretty sure all the after market jobbys cast to a FM frequency .. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

What about this one:

In2Digi D-JV-2

https://www.in2digi.com/products/

https://www.in2digi.com/downloads/D-JV-2/D-JV-2-key-points.pdf

Apparently fully integrates with the infotainment. Must be enabled via IIDtool or eqv.

This infers that its " Plug & Play " ?

• DAB to DAB+ Update :

Simply exchange the OEM part for the in2digi module
(requires basic modifications to power and antenna connections)

No new vehicle DAB install configuration required

* Edited-

Plug & play for 2010 onwards Welcome Rosie J - The Newer Kid on the Block
RIP Rosie (We all Love Rosie - especially in S mode at the traffic lights)

Nice find!

Pricey, but if it works and adds DAB and DAB+, maybe it's worth it?

Trouble is I'd need two, one for the RR and one for the Jag XF!

Tell y'all what - I have two factory DAB modules in my cars. As I'm a broadcast engineer I really want DAB+.

If you don't care about the +, but want DAB, I'll sell you my factory modules for 250 - half the price of the In2Digi module.

Then we subsidise each other!

A

Didn't work for me either. I tried selecting the various different DAB options in the CCF, same result.

millerj90 wrote:

It didn't work for me (2012 Westminster).

It appeared on the menu, but I couldn't select it.

YMMV