Hi all recently changed 2 front brake pipes and front pads

also 2 rear flexi pipes then onto bleeding the brakes
But can’t get decent pedal
Straight to floor there is a pedal when engine is off but when running nothing
Tried bleeding manually and with a brake kit

When pumping brake pedal there is an air sound from the servo area is this normal?
Any ideas?
Cheers

I don't know why you are having trouble bleeding the brakes but the air sound from the servo is normal. When you press the brake pedal and therefore move the servo diaphragm forward air is drawn in behind the diaphragm through a filter surrounding the push rod from the brake pedal.

Yes thought that was normal I’ll try bleeding again tomorrow been at it a week though
cheers