fullfatrr.com - View topic - Adjusting soft close doors

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical (L405) > Adjusting soft close doors

Page 1 of 1

Print this entire topic ·

shiversaint

Member Since: 16 Aug 2021
Location: Sussex
Posts: 9

2013 Range Rover Vogue SE SDV8 Balmoral Blue

Adjusting soft close doors

Both of my rear doors have tempremental soft close ability, one side worse than the other but neither work consistently.

I think it's just an adjustment thing, the system doesn't seem to realise the doors are half latched.

Question I have is...what exactly am I supposed to adjust? Has anyone done this successfully?

14th Dec 2021 6:01pm

stan
Site Moderator

Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 34935

found this in an old thread,

intentionally close the door so that it does not fully close/ seat. Then apply pressure on door handle towards the car as if you are pushing the door inward. The soft close will kick in and close the door. ... - .- -.

click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

14th Dec 2021 6:08pm

Cam-Tech-Craig

Member Since: 04 Aug 2011
Location: Gloucestershire
Posts: 16176

2015 Range Rover SVAutobiography SDV8 Loire Blue

The soft close is a motor in the bottom of the door… How it works and how you adjust it I’m not sure? Changed a few that had failed but have never been asked to adjust one… Cant be that difficult though!

Remove the door card and look in the bottom of the door and you’ll find said motor on an 18” cable assembly… 👍

14th Dec 2021 6:47pm

shiversaint

Member Since: 16 Aug 2021
Location: Sussex
Posts: 9

stan wrote:
found this in an old thread,

intentionally close the door so that it does not fully close/ seat. Then apply pressure on door handle towards the car as if you are pushing the door inward. The soft close will kick in and close the door.

Thanks, this does work to make it kick in, but is not an adjustment of any sort, you have to do this every time...

15th Dec 2021 10:16am

shiversaint

Member Since: 16 Aug 2021
Location: Sussex
Posts: 9

Cam-Tech-Craig wrote:
The soft close is a motor in the bottom of the door… How it works and how you adjust it I’m not sure? Changed a few that had failed but have never been asked to adjust one… Cant be that difficult though!

Remove the door card and look in the bottom of the door and you’ll find said motor on an 18” cable assembly… 👍

Got it, I will have a look. Maybe the cable is stretched or something.

15th Dec 2021 10:17am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum