![]() | Home > Technical (L322) > L322 Dipped Beam Failure |
|
|
|
| Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8825
|
Here you go...
|
||
|
| GUMBALLER Member Since: 22 May 2022 Location: Hampshire Posts: 40
|
Many thanks |
||
|
| GUMBALLER Member Since: 22 May 2022 Location: Hampshire Posts: 40
|
Many thanks |
||
|
| GUMBALLER Member Since: 22 May 2022 Location: Hampshire Posts: 40
|
So, after testing it appears I have no power on the dip beam wire.
|
||
|
| Danb_220_2019 Member Since: 02 Jan 2023 Location: Suffolk Posts: 262
|
On a 2002 it'll be BMW electronics. The BMW light control module or LCM maintains a series of counters for short circuits, bulb failures and so on. If the counters reach a certain threshold the LCM disables the power feed to the circuit or circuits affected. The counters can only be reset using diagnostics, which on a BMW would be done with Tool32 from the BMW Standard Tools.
|
||
|
| GUMBALLER Member Since: 22 May 2022 Location: Hampshire Posts: 40
|
Much appreciated Danb_220_2019 |
||
|
| GUMBALLER Member Since: 22 May 2022 Location: Hampshire Posts: 40
|
Very much appreciated |
||
|
| Danb_220_2019 Member Since: 02 Jan 2023 Location: Suffolk Posts: 262
|
No worries! |
||
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis







