L322 2010 5.0 S/C - Screen stuck on logo and 'FEM' is dead. | |
Hi All,
I've been googling for a few hours but have reached an impasse.
My car has had an issue with a wet parking aid module and I've been trying a few things in SDD to try and get something working again, but alas it appears you need a 'fresh' module so it can configure the VIN number into a new unit, it won't allow you to update an existing VIN on a module from another car.
However, whilst I've been looking into this, SDD has now started reporting that my FEM (Front Entertainment Control Module) is no longer communicating. It was, I have SDD sessions from a few days ago showing it was fine, but not any more.
So now my screen is freezing at the Rage Rover logo. I suspect the FEM has gone bad meaning that the MOST circuit is down as all the other MOST modules are not working.
What I can't work out is what the hell the FEM is!
I'm looking through the workshop manual as the MOST section, it doesn't list anything even closely named Front Entertainment Control module (FEM) so I'm a bit lost.
I'd like to take the FEM out to see if there's anything obviously wrong with it and see if I can find a replacement part assuming it needs it.
So the question, after all that, is "What is SDD actually meaning when it says the FEM-Front Entertainment Control Module?
Thanks for any advice,
Cheers, Matthew
|