![]() | Home > Maintenance & Mods (L322) > Just replaced air compressor on 2008 RR - now weird problem |
![]() ![]() |
|
|
Jamiehol Member Since: 26 Sep 2014 Location: Ipswich Posts: 230 ![]() ![]() ![]() |
Can’t help but I swapped out for an AMK compressor on my 2007 RDV8 did the firmware update as well but I can no longer lock the car in access mode either so will follow this. |
||
![]() |
|
muddycharles Member Since: 05 May 2011 Location: Miami, FL Posts: 94 ![]() ![]() ![]() |
Lets see if anyone else has this issue. 2008 HSE B. Grey
|
||
![]() |
|
dolph34 Member Since: 14 Sep 2015 Location: Kildare Posts: 1724 ![]() ![]() ![]() |
I had the same issue on my 2007 which had an AMK installed. Didn't effect me so i left well alone. 2015 4.4 AB
|
||
![]() |
|
Mile High RRSC Member Since: 23 Aug 2023 Location: Colorado Posts: 3 ![]() ![]() ![]() |
Same issue here as well. I tried to troubleshoot by flashing back to the Hitachi firmware and I regained the ability to lock the suspension in access mode, but flashing back to the AMK firmware made it not work again. I definitely think it has something to do with the AMK firmware provided through the IID tool, but many emails back and forth the GAP Diagnostics got me no where. They just say it can't be the firmware and they get it from LR so everything should work.
|
||
![]() |
|
muddycharles Member Since: 05 May 2011 Location: Miami, FL Posts: 94 ![]() ![]() ![]() |
And went looking for the email exchange with GAP - here it is. They sent me a custom flash and that resolved it.
|
||
![]() |
|
Mile High RRSC Member Since: 23 Aug 2023 Location: Colorado Posts: 3 ![]() ![]() ![]() |
Thanks so much for looking that up and sharing MuddyCharles!!
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
