Hi guys, got the clonk from OSF wheel when turning slowly Indy says it's the anti roll bar link, he has quoted 1/2 hour labour to change, was thinking .....it must be easy - do you think I (fairly novice mechanic) could do it? If so what tools are required? Cheers in advance! 2003 Vogue 4.4 V8 Java Black

It's an easy job with just a couple of basic tools required. I take it you are doing both sides? Previously..
Vogue SE TD6
Defender 90 2.4
Defender 110 TD5
Vogue 3.5 EFI

Yeah will do as they were reasonably priced I got two 2003 Vogue 4.4 V8 Java Black

Easy job to do yourself no need to even take wheels off. Lock car in off-road height. Lock wheels left or right depending on what side you are doing. It helps to have a bottle jack under the arm to take tension of droplink making it easier to remove one bolts are undone. Just make sure you put washer on correct side take note when removing. Ten minutes a side at most hardest bit undoing nuts Buy decent replacements not cheapest as then you won't have to do again for a long time  Present :2008 TDV8 HSE
Gone Audi A5 2.7TDI
Gone Discovery 3 HSE
Gone Mercedes CLK
Gone Range Rover 2.5 DSE

Have a look here, Pictures 4 and 5

http://www.fullfatrr.com/gallery/thumbnails.php?album=359 .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999