I know someone on the forum has fitted these but I cant find the thread:-



http://www.ebay.co.uk/itm/Range-Rover-L322...5409fba11d

Are they difficult to fit? Do you need extra lengths of wire? Is there a particular route to thread the wiring?

Thanks all. Travelling around in circles again.

http://www.fullfatrr.com/forum/topic24379....+reflector

Thanks for the link pld.  Travelling around in circles again.

Don't waste your money. They are crap . Look good but are very poor quality my first set lasted 4 days before they went faulty &. Stop lamps stayed on with tail light Supplier sent replacements they lasted 8 days. One stopped working other one kept flickering. . Complete waste of money. They ended up in the bin

Oh, I was quite keen on fitting them. If two pairs have failed I wont bother. Ta for the info. Travelling around in circles again.

They aren't that crap.
I have some fitted and working fine.
I should point out that whatever the seller says they are not a straightforward fit in terms of electrical connections.
I found that to make them work reliably, particularly with the brake lights it was necessary to feed each of the two circuits thro independent relays.
I have a 12 volt supply from the rear fuseboard supplying the contacts on the two relays.
One relay coil is fed from an ignition source so that the leds are on "low" all the time the ignition is on.
The other relay coil is fed from the brake circuit so that the leds go to "high" when the brakes are applied.
You could also chose to have one of the relays controlled via the sidelight circuit.
If you don't feed them independently thro relays the brake light function of the reflectors results in the cars brake lights "locking on" together with the leds when the ignition key is removed.
This fault seems to be something to do with the leds being fed from two 12V sources simultaneously to obtain "high" and "low" as advised by the seller. Might only be peculiar to RR's, I've no idea, but using relays definitely solves the problem.
Whether you like them or not is down to personal choice.

craig has these fitted and they looked very nice when i saw them.. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

And the original:

http://www.fullfatrr.com/forum/topic13965.html?highlight=rear+drl

 .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

All seems very complicated!