what would be the proper name for the small pronged clip with the squared off part that clips into the lower part of the rear light lens-its like a lower link part-it attaches to the plastic barrel like contraption on the rear inner behind light?
the lights fasten fairly well without them-but i would like to obtain same
also what is the order of fastening the two inner bolts-i removed my light guards and there was a bit of an assortment
i have used an allen key with washer-but i have spacers also...
i know its trivial -but i"d like it correct

Spire nuts if you mean the metal clips

Is this the sort of thing your after?

http://www.ebay.co.uk/itm/M6-6MM-THREAD-ZI...1c2c0d916a Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

If its the Black Peg that slides up and down at the bottom of the light, it is not available as far as I can see. However they are removable, they slide off with a bit of , I suggest that you try an appeal to other members who might have an old broken light, and might be persuaded to take pitty on you  Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

yes=thats it better description than mine-black peg with the square attachment
so its not available then-i was gonna try land rover but thats a pity..

You could try L/R to see if they have changed one, and the broken one's kicking about  Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

I may have some good news for you bud , I have just sold a rear light on fleabay, and the chap is coming up tonight so that I can fit it......... so there will be a broken one floating about......... If your still in the market and the peg is intact, I might just be your new bestest bud
I'll update you later. Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

great-thank you