Can I send someone my PDC module to test pls?

Needs to be 2002-2004 I think? With front and rear sensors. You'll need to be happy gaining access to your module to swap the plugs over. It lives in the right hand side of the boot, behind the fuse board, so three nuts need undoing.

My fronts still dont work, but all wiring seems to be intact.

You can just seen one of the plugs (blue) here:


18112010200 by d86cfv, on Flickr 

have not been near the electrics on a range rover yet so give me a basic guide and ill do it,

Or if you ever travel to london anytime you can do the test yourself on mine, im on the east side.

have front and rear sensors, 2004. 2004 black Vogue TD6

Dan, you can use mine if you like when I come over for the electrics? Is it the same ..... mine only being a lowly HSE an' all??

hi dan, send it to me ...no probs V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

doesn't matter which MY as it is the same from BMW through to Facelift models. I'll test it if you want to drive up to Lyneham...

I also still have my old one here if you want to use that to fault find. Also have a couple of new sensors in the garage that you may want/need to buy! I can give you a hand with the diagnostics of it if you want as well...

Just let me know

Steve 06MY 4.4 V8 Autobiography Cairns Blue with Navy & Parchment Interior

hi dan, sounds like stevegt is your man.. well done steve V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

Thanks for the offers guys, I guess it would make sense to pike your brains Steve - I'll drop you a PM.

James - Are you around this weekend?

Dave - Have you got photo's of the trims yet?

D 

Dan i am here on Saturday adn early Sunday am (til 12)

Dolphinboy wrote:

Dan i am here on Saturday and early Sunday am (til 12)

Cool, might treck over to yours on Sat late afternoon then if thats any good? 

Sat sounds ace! will chill the beers! Or should that be defrost??

Just an update to close this off. I bought a random BMW PDC ECU because it "looked right" turns out it works fine and I now have fully functioning PDC.

It cost all of £27 inc P&P from fleabay

Described as:
Compatible BMW Part #'s
P/N: 66216921414
P/N: 66216942676
P/N: 66216958515
P/N: 66216985500
P/N: 66219112454
P/N: 66209129816

From the E83 and E53 (X3 & X5)



Faulty LR PDC ECU:

Range Rover PDC ECU by d86cfv, on Flickr

Working BMW PDC ECU:

BMW PDC ECU (fits Range Rover) by d86cfv, on Flickr 

Did the backs work and just the fronts not. Non of mine work and i have one wire that i knows not connected on the front due to me stripping wire but they never have worked since i got it. would one wire stop whole system, Might take a gamble on this unit (mines 2002) Look ok?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...K:MEWAX:IT

I have no clicking from any sensors at all?

You can have my old module if you want - only the rears worked with it. If you want to just test it?

D 

Going to wire the broken sensor wire back up tomorrow and go from there i think. May take you up on that though Dan.