|  | Home > Technical (L405) > New Engine 12 months ago now regular Limp mode up gradients | 
|     | 
 | 
| 
 | 
| stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35884    | would the fuel tank level be the same when it goes into limp? ... - .- -.
 | ||
|  13th Feb 2020 8:57pm | 
 | 
| Richardince Member Since: 14 Oct 2018 Location: Suffolk Posts: 39      | Not something I have noticed but would think doubtful Will note next time. | ||
|  13th Feb 2020 9:14pm | 
 | 
| GraemeS Member Since: 06 Mar 2015 Location: Wagga area Posts: 2782    | Does flooring it readily trigger the fault? | ||
|  13th Feb 2020 10:07pm | 
 | 
| Richardince Member Since: 14 Oct 2018 Location: Suffolk Posts: 39      | No it needs to be a fairly high constant throttle held for 10-15seconds and always up a gradient, I have tried nailing it and this does not cause it to go into restricted performance. | ||
|  14th Feb 2020 6:55am | 
 | 
| GraemeS Member Since: 06 Mar 2015 Location: Wagga area Posts: 2782    | Best I can suggest is to try to have it fault on the way to servicing and don't switch it off until the fault codes can be retrieved. | ||
|  14th Feb 2020 7:58am | 
 | 
| charlie croker mk2 Member Since: 21 Jun 2017 Location: Yorkshire Posts: 174    | Change the fuel filter, it fixed mine. Exactly the same symptoms | ||
|  14th Feb 2020 10:55am | 
 | 
| Richardince Member Since: 14 Oct 2018 Location: Suffolk Posts: 39      | Managed to get it to fail again on road where it has failed before and capture on video which I don’t think can post here?
 | ||
|  14th Feb 2020 4:43pm | 
 | 
| AJGalaxy2012 Member Since: 11 Jun 2018 Location: Gainsborough Posts: 1464      | Have you had the fault codes read? If not buy a GAP tool or have them read somewhere, without that information youre running round in the dark guessing BMW i3 Electric Car
 | ||
|  14th Feb 2020 4:57pm | 
 | 
| Richardince Member Since: 14 Oct 2018 Location: Suffolk Posts: 39      | 
 
 Actually on 32 mile trip got to fail 4 times, a record! To get it to fail has to be hard acceleration after a stop at a junction. Stop then take off does it as well. Happy to buy tool to read code what of attached do I need? Or something else? | ||||||
|  14th Feb 2020 6:12pm | 
 | 
| ebajema Member Since: 24 Mar 2011 Location: New Plymouth Posts: 4782      | Have you checked the fuel filter yet ?? Maybe to much water or crap in it.  If it is a fuel filter issue, like water than the incline can cause that water to be pulled through with the fuel maybe.  Not sure if there is a water drain on the filter that you can open and drain water out till the fuel starts coming through, maybe the likes of Craig can help you with that ???
 | ||
|  15th Feb 2020 9:25am | 
 | 
| Dolphinboy Member Since: 07 Dec 2009 Location: Bristol Posts: 3285      | Buy the IID tool BT (blue tooth) for £399. 
 | ||
|  15th Feb 2020 4:28pm | 
 | 
| Richardince Member Since: 14 Oct 2018 Location: Suffolk Posts: 39      | The car was at main dealer this week and they found a fault in the turbine shutoff valve which was replaced with the engine. Replaced under warrantee 👍 let’s home this has fixed it finally. | ||
|  29th Feb 2020 2:26pm | 
 | 
|     | 
 | 
| All times are GMT | < Previous Topic | Next Topic > | 
| Posting Rules 
 | 
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
 
 





