TD6 '02 FFRR Fog Light Refurbishment |
|
TITLE |
+ |
- |
FILE NAME |
+ |
- |
DATE |
+ |
- |
|
|
05 - remove Second screw – 45 views
|
|
04 - Remove first screw – 46 views
|
|
03 - Gently lever the cover off using a flat bladed screwdriver – 47 viewsuse a cloth to cover the screwdriver blade for added paint protection
|
|
02 - Foglight with OEM bulb – 39 viewsExisting lamps still working well, but "yellow"
|
|
08 - Release lamp housing from connector – 45 viewsThis is quite stiff so use a flat bladed screwdriver to release the small clip
|
|
09 - Lamp Housing removed from car – 48 views
|
|
07 - All screws removed and lamp housing withdrawn from bumper – 45 views
|
|
06 - Remove third screw – 43 viewsThis one is set further back so you might need a torch to see exactly where it is
|
|
01 - Foglights on – 39 viewsIn preparation for converting my fogs to drl's I decided to give the lamp housing an overhaul
|
|
14 - Silvering badly deteriorated – 51 viewsNo alternative but to put these back in. May be tempted to have a play with some kitchen foil next time around
|
|
13 - Plenty of "crud" collected in the glass housing – 41 viewsThe glass was pitted on both sides and didn't respond to vigorous cleaning
|
|
12 - Lever back the plastic tabs carefully and ease the lamp housing from the glass housing – 44 viewsas you can see the lamp housing is in a bit of a state. The original "paint" is all but gone, and the, I guess, alloy housing has badly corroded. Take care with the plastic tabs holding the housing lugs in place, the glass housing plastic is quite brittle and the tabs can easily snap off (he says with experience)
|
|
17 files on 2 page(s) |
|
1 | |
|