So my parking sensors are not working, get the long beep and flashing light.

Walked around the car listening for the clicks and one off on the front and one off on the back

So my next question, where is the best place to get 2 new sensors from?

Also got the usual rear wiper issue, need a motor! Agasin best place to get one? I did an enquiry on partsgateway and price are crazy!

Cheers all

Richard

Check the looms while the bumpers are off for £18 each they are worth replacing as fail more often than the sensors. Two minute job each end with the bumpers off.

try moving a good sensor to a suspected faulty one to see if its the sensor or the wiring..

sensors and motor from ducky dan .. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Hi Winslow, I have a spare brand new, still in packet, sensor (black) which u can have for £20. Gaz's advice ref new loom is good but check you haven't got a tear or kink in the outer sensor wires as this is where they normally tear due to their thing core. Bit of leccy tape did the trick for mine (hence the unused sensor)

Ref the rear wiper motor, look at RRUKs excellent post on how to take off, clean and get it working again. I have done this to both my RRs and not had a problem with them since. It's normally just a build up of cr@p inside due to the poor design. Should take less than an hour to do.

It is in the garage later today for a thermostat so will be chekcing tyhe other things too

I can only find RRUK post on how to replace and new motor and not fix and existing one, is there a link?

The sensor on the rear thats failed id the n/s end sensor and the front is the OS middle one next to plate

Thanks

thread detailing the stripdown to clean it all out or replace the non return valve, which tends to get blocked.........

http://www.fullfatrr.com/forum/topic884.html?highlight=rear+wash

http://www.fullfatrr.com/forum/topic8700.html?highlight=rear+wash

http://www.fullfatrr.com/forum/topic6402.html?highlight=rear+wash

http://www.fullfatrr.com/forum/topic4298.html?highlight=rear+wash

http://www.fullfatrr.com/forum/topic2067.html?highlight=rear+wash

Anyone know the part numbers for the rear and front PDC looms? Tom

Current Drive
2011 4.4 TDV8 Autobiography - Santorini Black - Ivory Leather

Previous Drives
2004 Model Vogue Td6 (Touchscreen) - Java Black - Parchment Leather
1994 RR Classic 3.9 V8 Soft dash - Niagara Grey - Grey Leather
1972 Series III SWB Safari - Green (Hand Painted) - Black Plastic

give Ducky Dan a shout re loom prices.. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

As above the rear is £18 from Dan and £20 at most other LR Parts (local)

The front will be similar money.

REAR PART NO: LYMD001992 (Number on invoice but looks odd)

Nice one Gaz! Tom

Current Drive
2011 4.4 TDV8 Autobiography - Santorini Black - Ivory Leather

Previous Drives
2004 Model Vogue Td6 (Touchscreen) - Java Black - Parchment Leather
1994 RR Classic 3.9 V8 Soft dash - Niagara Grey - Grey Leather
1972 Series III SWB Safari - Green (Hand Painted) - Black Plastic