Thankyou,
Is it right that the new LCM has to be Programmed to the FF?. I took mine to a so called specialist today and He wouldn't even touch it as I have upgraded supercharged LED rear lights. He will only work on standard cars.

Where the codes cleared/reset after the new brake light switch was fitted?

Are the brake light bulbs all seated correctly?

I think there may be a big hint in your last post, what year 'upgrade' lights are they, if they're LED light units, then do they possibly not need the extra wiring bits to make them work properly? If that's not been done, then that could be the root cause of the problem.

Just done a quick search and got the following link:

http://www.fullfatrr.com/forum/topic14405....ear+lights

This may be of use

Thankyou will check bulbs yes codes were cleared.
Ive had the FF for 6 years now LED Lights were already fitted.Had no probs up and till now .
Thanks for the link

No worries Dazzler, was just thinking that there was a post in the link mentioning HDC/ABS/Air Susp Inactive warnings coming up if the ballast resistors, extra wiring boxes, etc., weren't fitted. Thought that there might be a fault with a resistor or possibly the wiring which may be the culprit, especially if the lights have been in for 6 years plus.

what's a LCM, and is it fitted to the 08 tdv8?

My L322 has standard tail lights. ______________________________
Vogue tdv8 08MY poverty pack - wow

light control module...and yes you do have one. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

We all have one Even Stan