Hi guys,

as a RR newbie I need your help, I found a loose plug on the right side of the engine and I cant figure out where it belongs to.
It has two wires, one white/black and one brown/black. The plug looks very clean so I think it must have been connected to something. I only have a basic OBD tool which told me that the purge valve has an error, beside that the RR only shows shows that the air supspension is inop.

Any ideas?

I cant see the plug, there is an auxiliary water pump on the inner wing over that side you could look at

Thanks, I checked the area...thats where the cable comes from and leads towards the back of the car....I just flipped the plug over so it would be better visible in the Picture...

still no clue

I will check mine. it may be something to do with the Fuel Burning Heater that probably isn't fitted to yours.

could be for the diesel cooling fan. which may not be fitted in your region. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

If you note the colours of the wires, it's fairy easy to identify circuits by looking at the circuit diagram. Ron B. VK2OTC
2003 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA