Just bought this gonna give it a try when I do the rear bushes. Got a 3 ton sgs trolley jack as well.
https://www.aldi.co.uk/compact-car-jack/p/099041307375000 2004 Autobiography TD6 Java Black

Looks cheap enough

It might be worth trying to fit a BMW mount on it like some did with the Sprinter jacks -

https://www.fullfatrr.com/forum/topic14177.html

Make sure it has enough height to lift the wheels off the ground. Last one I bought from Aldi didn’t, despite being strong enough. Got - 2017 SDV8 Autobiography in Loire Blue
Had- 2008 TDV8 Vogue SE in Java black
Had - 2007 S/C in Stornoway Grey

Lifting range with load approx. 195-320mm

dont think it will be enough, but do keep us posted.

Still not got round to using it yet but will post once I can. 👍🏾 2004 Autobiography TD6 Java Black

I saw this in Aldi and was tempted but I don’t think it will go high enough. 2010 MY Vogue SE TDV8 3.6 Stornoway Grey- fully loaded

Used it today to aid in removal of rose joint bushes, it didn’t have the height to lift the car like my 3 ton sgs jack does. It helped lift the hub into place once I pressed out the old bushes and replaced, but the bottle jack was so slow at retracting back to normal height even with the release screws nearly all the way out.
It’s ok but would only use it as a secondary jack aid during maintenance.
Might have to look for something else to keep in car instead of the normal jack. 2004 Autobiography TD6 Java Black

The oil might be thick so it won’t flow too well especially in the cold. Might get better with more use 2010 MY Vogue SE TDV8 3.6 Stornoway Grey- fully loaded

What sort of lifting range do you need for these to be viable? Would be good to know when searching

Search on here for the Sprinter jack. Lots about it and the mods for the FF. Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT