Nothing from me.....as I mentioned I'm sure someone here like APT would do it..... 2017 Range Rover Vogue SE SDV8 (with e-diff)
2012 Range Rover Vogue TDV8 Luxury (SOLD)
2010 Land Rover Discovery 4 3.0 TDV6 HSE Stornoway Grey (SOLD)
2006 Land Rover Discovery 3 SE 2.7TDV6 Black, G4 Challenge Copy (gone)

I'm a 100% yes on a winch cradle for the L405.

I'm in Brisbane Australia and have dealt with a few fabrication companies that are more than capable of manufacturing these.

I'd be happy to buy the drawings and test fit on my own car for Australian suitability.

Otherwise I'm happy to purchase and have freighted if need be.

Finally finished this part of the touring set up

GME XRS UHF
Enerdrive 125a/h lithium battery
Enerdrive DC charger
ARB twin piston air compressor and tank
Redarc TowPro Elite

Drew, PM if you want to catch up and compare notes (I’m in Brisbane with L405 with same UHF, Tow Pro, dual battery kit etc

Click image to enlarge

Bump

Any developments on measurements?

I have a fabricator ready to go.

Brisbane based fabrication?? 2017 Range Rover Vogue SE SDV8 (with e-diff)
2012 Range Rover Vogue TDV8 Luxury (SOLD)
2010 Land Rover Discovery 4 3.0 TDV6 HSE Stornoway Grey (SOLD)
2006 Land Rover Discovery 3 SE 2.7TDV6 Black, G4 Challenge Copy (gone)

For the Australian guys my fabricator is willing to manufacture 5 units while my car is apart to ensure 100% fitment on all cars.

Looking at doing in the next two weeks as his work goes completely quiet.

Price is about $900 - $1,000. That is zinc coated, powder coated and mounting hardware included.

Yes from me 2017 Range Rover Vogue SE SDV8 (with e-diff)
2012 Range Rover Vogue TDV8 Luxury (SOLD)
2010 Land Rover Discovery 4 3.0 TDV6 HSE Stornoway Grey (SOLD)
2006 Land Rover Discovery 3 SE 2.7TDV6 Black, G4 Challenge Copy (gone)

Nice Brisbane 405 club guys
Loving the luxo-barge taken up an off-road notch on this thread!

. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

DrewS, has your car got a front camera out of interest? I'm guessing this needs to be relocated as part of any winch set up.

Click image to enlarge

Hi Guys sorry for the lack of response lately, things have been a little busy for me. Sorry to say I think the logistics of shipping to OZ make it uneconomical, but I hope you all manage to make use of the pictures and show a fabricator out there what I have done this end, maybe they can replicate it.

As for The UK guy's I am yet to take an order. But will but something up on ebay later today. I have managed to negotiate a lower cost per unit from the supplier, so I will get these for sale online. Each unit is made to order, so if anyone has any requests like, duel hooks, or Radio antenna mounting points etc. then we can accommodate this. we can also fully fit these for the customer, but would need the car for 2 full days to do this.

In regards to the front camera, that will be a problem, as re-fitting it elsewhere may not be an option

I really want a winch in front of my 2014 RRS supercharged. Where can I get one?

try asking on the RRS forum.... ... - .- -.




Y. O. L. O.
.

Hi there

I believe it will fit yes. The later 2017 models is where they introduced a centre camera on the front and this would need relocating.

My bad, sorry. I didn't realize I was in a RR forum. I guess I got over excited seeing an installed winch.

However, if this one will fit it for sure, I am totally interested in getting one if they are still available.