|  | Home > Technical (L322) > Battery drain test procedure | 
|     | 
 | 
| 
 | 
| Phoenix Member Since: 16 May 2022 Location: Gone Posts: 1631    | ... | ||
|  18th Dec 2023 4:44pm | 
 | 
| camcc Member Since: 01 Oct 2023 Location: Godalming, Surrey Posts: 38    | The car has only been on the drive with a brand new battery for two days, not driven except for the 30 mile drive I took it on after installing the new battery. The battery reading yesterday afternoon was 12.5V and today 24 hrs later it is 12V and I got another suspension error (which I've cleared again). That's like 50% battery charge in 24 hours...which seems a lot for a 60mA draw. Could my alternator be causing issues? How can I accurately test that? (When I start the car the voltage goes up to 14.x)
 | ||
|  18th Dec 2023 4:53pm | 
 | 
| pcourtney Member Since: 14 Jan 2020 Location: Stansted Posts: 1032      | I have just gone through all this myself earlier today, if the car is stationary for 2 or 3 weeks the battery is dead, but this is on my RR 2004 4.4 BMW Engine Petrol V8
 | ||
|  18th Dec 2023 5:02pm | 
 | 
| Phoenix Member Since: 16 May 2022 Location: Gone Posts: 1631    | ... | ||
|  18th Dec 2023 5:23pm | 
 | 
| camcc Member Since: 01 Oct 2023 Location: Godalming, Surrey Posts: 38    | OK....after a few hours measuring across fuses I am unfortunately no closer to finding the source of my ~60mA drain.
 | ||||||||
|  18th Dec 2023 9:20pm | 
 | 
| camcc Member Since: 01 Oct 2023 Location: Godalming, Surrey Posts: 38    | 
 See pic below. It happens when the battery voltage gets down <12V. I think it's a result of the drain, not the cause but happy to be challenged on that. Also, see previous post above for latest troubleshooting update. Appreciate all your advice so far. | ||||
|  18th Dec 2023 9:30pm | 
 | 
| Phoenix Member Since: 16 May 2022 Location: Gone Posts: 1631    | ... | ||
|  18th Dec 2023 9:33pm | 
 | 
| Phoenix Member Since: 16 May 2022 Location: Gone Posts: 1631    | ... | ||
|  18th Dec 2023 9:35pm | 
 | 
| camcc Member Since: 01 Oct 2023 Location: Godalming, Surrey Posts: 38    | 
 Code is: U2007-67 (AF) Valve(s) circuit - Algorithm based failure - signal is incorrect after the event . 2005 L322 4.4 AJV8 | ||
|  18th Dec 2023 9:43pm | 
 | 
| Phoenix Member Since: 16 May 2022 Location: Gone Posts: 1631    | ... | ||
|  18th Dec 2023 9:55pm | 
 | 
| camcc Member Since: 01 Oct 2023 Location: Godalming, Surrey Posts: 38    | Eek, that is a bit above my current skill set!
 | ||
|  18th Dec 2023 10:42pm | 
 | 
| Phoenix Member Since: 16 May 2022 Location: Gone Posts: 1631    | ... | ||
|  19th Dec 2023 9:12am | 
 | 
| Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6434    | Have you tried physically disconnecting the SatNav DVD unit yet? .
 | ||
|  19th Dec 2023 5:09pm | 
 | 
| camcc Member Since: 01 Oct 2023 Location: Godalming, Surrey Posts: 38    | Hi all,
 | ||
|  3rd Jan 2024 4:18pm | 
 | 
|     | 
 | 
| All times are GMT | < Previous Topic | Next Topic > | 
| Posting Rules 
 | 
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
 
 




 so will do that after and wait another 30 mins!
  so will do that after and wait another 30 mins!


 
