Just fitted new front discs and pads, pattern parts........noticed this cut out in one disc. Contacted the supplier of the discs who contacted their manufacturer who confirms this is to Land Rover spec but they don’t know why its there ......any idea..........

I think it indicates the minimum thickness you can run the disc down to before you need to change them.

+1

Always been told that it is a waer indicator 56 TDV8 Vogue SE
9 Freelanders, 2x 2002 TD4ES, 2001 TD4, 2002 1.8GS, 2000 XEDI, 2x 2000 1.8ES, 2004 1.8 & 2000 1.8 GS (rolled)
91 Lotus Carlton (sold)
90 Lotus Elan (BRG)

I always assumed it was to balance them, but the minimum thickness sounds more likely  
Gone - Range Rover Supercharged 2006

I think LR pinched the idea off BMW who have used the idea for a long time.

BMW having owned LR after BAE and before Ford? Erm....so? Land Rover Addict
XXXXXXXXXXXXXXXXXXXXXXX

Previous
XXXXXXXXXXXXXXXX
2009 5.0V8SC Autobiography
2006 4.2V8SC Autobiography
2004 4.4V8 Vogue

I thought it was for balancing. The disc's are cast then machined flat etc they would then be balanced. Or that's how I always thought it was. [img]http://www.fuelly.com/driver/rob2529/range-rover[img/]
04, 4.4V8, Vogue Oslo Blue with LPG.
"You can sleep in your car, BUT you can't race your house!!!!"

If something can't be fixed with a hammer....... You have yourself an electrical fault!

Could settle it by measuring- the min thickness is in RAVE.

100% for balancing...



Craig

I'd say balancing but it's a lot to take out and I doubt the disc would be that much out of balance

Wear sounds good but that's a lot of wear and leaves a pretty thin disc.

So really no scoobie doo. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

resonance....so that the discs dont 'sing' when rotating.. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.