![]() | Home > In Car Electronics (L322) > Blown speaker, bit of advice? |
![]() ![]() |
|
|
nicedayforit Member Since: 11 Jun 2011 Location: Beside the Solway Posts: 3979 ![]() ![]() ![]() |
I found the nuts holding the bass speaker were loose allowing the whole thing to vibrate. Tightened up the nuts, never been a problem since. Could be worth a try. |
||
![]() |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35706 ![]() ![]() |
panel off , see if it vibrates.....
|
||
![]() |
|
GGDR Member Since: 26 Nov 2016 Location: London Posts: 3553 ![]() ![]() ![]() |
Thx Nicedayforit, a great shout.
|
||
![]() |
|
northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8751 ![]() ![]() ![]() |
It may be obvious, however it may well be something in the coil.
|
||
![]() |
|
GGDR Member Since: 26 Nov 2016 Location: London Posts: 3553 ![]() ![]() ![]() |
Had a poke and found it's not the pillar speaker, it's the sub.
|
||
![]() |
|
Bushy30 Member Since: 03 Jun 2018 Location: Powys Posts: 1099 ![]() ![]() ![]() |
That would suggest a loose mounting somewhere I would have thought Current: 2011 FFRR Vogue SE 4.4 TDV8
|
||
![]() |
|
GGDR Member Since: 26 Nov 2016 Location: London Posts: 3553 ![]() ![]() ![]() |
Yes sure Bushy makes sense and I found this is the WM which is basic but a sensible starting point:
|
||||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
