Unfortunately mine is not coming up as subject to a recall. But I’ll use the info in my communications with JLR. Thanks

Here’s a picture of my knuckle.
 2017 (67) Vogue SE Corinthian Grey

As effected vehicles, My14 - 17 shown in Woody's video only applicable to the USA market?, if I'm not mistaken. Hope they sort yours out.

My late 2016 has just been diagnosed as having two cracked knuckles and its not on the recall list.
My indépendant range rover specialist is struggling to get genuine replacements from JLR because of supply chain issues. They say that they are being told it could be weeks before they get the parts. If they do, they are looking to charge me just under £4k for the pleasure. 2016 L405 SDV8 Vogue SE
2012 Range Rover TDV8 Westminster Santorini Black

That's an awful lot of labour as the knuckles are less than £900 each, unless they've recently increased the prices. L405 SV Autobiography LWB SDV8, finished in Aston Martin China Grey by ETO division.

That seems to be about right for the parts but I have no idea how long the job is meant to take. The garage typically charges £180 per hr. 2016 L405 SDV8 Vogue SE
2012 Range Rover TDV8 Westminster Santorini Black

Calvey, have you tried contacting your local main dealer or JLR directly to ask them to pay for it?

Also, please do report this issue to DVSA.

https://www.gov.uk/vehicle-recalls-and-fau...ety-defect

Have done both.
As others have said on this post, JLR have opened a case file and I need to get the car transported to my nearest JLR dealer (12 miles) and they will have a look at it and make an assessment. Expected outcome, as per the others, JLR will say that its not a defect and is fair wear and tear. Unless anyone has experienced anything different? 2016 L405 SDV8 Vogue SE
2012 Range Rover TDV8 Westminster Santorini Black

Mine was a 2016 outside of vin range and both knuckles and a o/s driveshaft were all done under the recall without any argument, so there is hope for.your case!! L405 SV Autobiography LWB SDV8, finished in Aston Martin China Grey by ETO division.

4RRS that sound encouraging. I hope I can be that fortunate. 2016 L405 SDV8 Vogue SE
2012 Range Rover TDV8 Westminster Santorini Black

Very interesting I'm back on this now as I feel enough time has passed since mine was done at no cost, I got mine done for free but I did get an email saying lots of legal things which for some reason I cannot forward

Ring customer care and get a case number explain even though it is outside the recall range this is clearly the same issue, they will ask you to take to nearest dealer for inspection then you will get an email saying they will cover as a goodwill gesture

Good news!

JLR are paying for my knuckle as a goodwill gesture. I’ve asked for both to be done, the retailer said they are only doing the broken one and fitting the support bracket to the other side (or maybe both). JLR have asked the retailer for costings to do both and will decide what to have done. I’ve been in a hire car for two weeks (extended for a further week at least) paid for by JLR. The customer care rep mentioned the cyber attack and said there may be a delay in sourcing the parts unless the retailer happened to have any in stock. They said I’ll be in the hire car until mine is ready. 2017 (67) Vogue SE Corinthian Grey

@abacus

I’ve just had BOTH mine done under recall 2weeks ago. I insisted they replace both. It was put back a few weeks due to lack of parts and the cyber attack but they should have them now.

Btw they damaged the side steps while doing it (they would go in on one side and stuck out on the other). I took it back in And they said they could’nt find the fault, despite it still happening when I parked outside the dealership!

So check all is good underneath before you drive off.

@dolphinboy

Glad you got both done, they really don’t fill you with confidence do they? I use a great independent for servicing because I know they won’t mess it up. 2017 (67) Vogue SE Corinthian Grey

Sorry to jump in with this question but I don't have an opportunity to look back through 56 pages for the answer - if the vin number is outside the 19-21k (approx) vin range, does that mean the later knuckles will be better/less prone to failure? I have an MY18 405 but it was manufactured in 2017 so it's a pre-facelift and not sure if it could be something to worry about? My vin ends HA3.. something something.
Thanks

would the knuckle assy from advance factors be recommended ? L405 2014 Loire blue Autobiography